User Manual

2. DMX512 connection

• Please use SLR – XLR wires connect the DMX output of the controller with the DMX input of the first

device, and connect the DMX output of the first device with the DMX input of the second device, always

connect one output with the input of the next device until all devices are connected.

• Please use appropriate XLR – XLR DMX cables.

3. Connection with the mains

• The person involved with the power connection must be qualified.

• Connect the device to the mains with the power plug.

• The earth must be connected.

• Power consumption 150W. Input power supply AC 100-250V, 50/60Hz.

4. The use of gobo holder frame

• Take out the gobo frame, lose the screws, insert the gobos and lock the screws again.

• Insert the gobo in the slot.