User Manual

19
5. - SETUP
5.1 – MENU
ADDR
d001 – d512
DMX address
CHMD
10 CH
10 channels mode
13 CH
13 channels mode
SLMD
MAST
Master mode
SL 1
Slave 1 mode
SL 2
Slave 2 mode (not active)
AUTO
SH 0 … SH 7
Automatic mode (show 0 – show 7)
SOUN
ON/OFF
Sound mode
SENS
0 … 100
Microphone sensitivity
LED
ON/OFF
Display off
DISP
Display reverse
PINT
YES / NO
Motor 1 reverse
TINT
YES / NO
Motor 2 revers
TEST
Test
RSET
Reset
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
 Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
 Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(DMX address = 001).
 Operate the Master unit in Automatic mode (Auto - Master) or Musical (Sound - Master)
to operate the entire system. The entire chain of Slave unit will act as the Master unit.