User Manual

24
5. SETUP
5.1 – MENU
Level
Function
Specifications
Description
1
DMX address
001 – 512
DMX addressing
2
DMX mode
CH7 / CH16 / CH48 / CH82 / CH480
DMX channels mode
3
Auto mode
Speed 1 – 9
Speed of internal program
Program 1 – 30
Setting of internal program
4
Slave mode
YES / NO
Set Slave mode
5
Network settings
IP address: 0.0.0.0 – 255.255.255.255
ArtNet settings
Subnet mask: 0.0.0.0 –
255.255.255.255
Net subnet univers: 000.00.00 –
255.15.15
6
ArtNet Output
A
ArtNet outputs
A+B
A+B+C
A+B+C+D
7
System reset
Reset
Reset
8
Software version
QPIXBAR V1.0
Software version
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
• Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
• Define the first unit of the chain as MASTER, all other units must be set in SLAVE MODE =
YES.
• Operate the Master unit in Automatic mode (Auto mode) to operate the entire system. The
entire chain of Slave unit will act as the Master unit.