User Manual

15
1. - INTRODUCTION
Thank You for choosing one of Our products!
Please refer to the instructions and warnings contained in this user manual, please retain it for
future reference.
This manual contains information about the installation and use of the device.
The information contained in this publication has been carefully prepared and checked.
However it is not assumed any responsibility for any inaccuracies. All rights are reserved and
this document can not be copied, photocopied, reproduced in whole or in part without
previous written permission of PROEL. PROEL reserves the right to make, without notice, any
aesthetical, functional or design changes or modifications in everyone of its products. PROEL
doesn't assume any responsibility for the use or application of the products here described.
The crossed bin symbol, shown on the product or on accompanying documents,
indicates that the product should not be disposed with other household waste at
the end of the lifecycle. To avoid any damage to the environment, the user is
encouraged to separate this product from other kinds of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Home users are
encouraged to contact the retailer where they purchased this product or their local
government office for details on separate collection and recycling this type of product.
Business users are encouraged to contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other commercial waste.
The lightning symbol with arrow in an equilateral triangle intends to alert the user
to the presence of not insulated "dangerous voltages" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point symbol within an equilateral triangle intends to alert the
user to the presence of important instructions for use and maintenance on the
accompanying documents of the product.
The “F” inside an equilateral reversed triangle means that the product is suitable
for mounting on normally flammable surfaces.
The product to which this manual refers comply with the European Directives
pursuant to the safety of electrical equipment supplied at low voltage (LVD) and to
the Electromagnetic Compatibility (EMC)
14
7. - MANUTENZIONE
Per garantire ottime prestazioni, l’apparecchio deve essere pulito frequentemente. Scollegare
l’apparecchio della corrente e lasciarlo raffreddare per almeno 35 minuti onde evitare il rischio
di bruciature. Utilizzare un’aspirapolvere o compressore e una spazzola morbida o un panno
per lenti per rimuovere la polvere depositata.
Le lenti, come qualsiasi altra parte eventualmente danneggiata, devono essere sostituite con
ricambi originali.
- Per mantenere una buona efficienza, si raccomanda di caricare la batteria almeno una volta
al mese
- Le migliori performance di una batteria al litio si raggiungono dopo almeno 3 cicli completi di
carica
- Non mettere in corto i poli della batteria al fine di evitare surriscaldamento o incendio della
stessa. In caso di stoccaggio delle batterie, isolare sempre i poli.
- Se la batteria è danneggiata NON TENTARE DI RIPARARLA. Essa deve essere sostituita.
8. - SPECIFICHE TECNICHE
· Alimentazione: 100-240V, 50/60HZ o tramite batteria interna 12VDC
· LED: 12x6W, RGBW 4 in 1
· Angolo del fascio di luce: 25°
· Potenza assorbita: 70W
· Ciclo di ricarica: circa 8 ore
· Durata batteria: circa 5 ore in full ON Work Mode High
circa 8 ore in full ON Work Mode Normal
· Modalità operative: Auto, Sound, Master/slave, DMX512
· Regolazione elettronica della luminosità 0-100%
· DMX: 4 – 5 – 6 – 9 – 10 – 16 – 20 canali
· Display digitale per impostazione indirizzo e funzioni
· Ingresso e uscita alimentazione per il rilancio
· Dimensioni barra (L x A x P): mm.950x230x90
· Altezza stativo: mm.2200
· Peso barra: kg 6.3
·
Peso stativo: kg 4.5