User Manual

LEDs will flash, after 10 seconds the display shows "Ack data ok". It means successful setting.

Otherwise, it will show "Wait Ack data", please check the setting andrepeat the steps above,

until it shows "Ack data ok".

DIFFERENT:

1. AII the lights working with different function (set DMX channel modes 3 – 4 – 7 or 10).

2. "AUTO MODE": there are six modes option.

Send the settings to the bars: go to the menu "LOAD SETTIN" and press "Enter". The blue

LEDs will flash, after 10 seconds the display shows "Ack data ok". It means successful setting.

Otherwise, it will show "Wait Ack data", please check the setting and repeat the steps

above, until it shows "Ack data ok".

Difference between “BOX Address” and “Light Address”

“BOX Address” is the address of the box (XXX)

“Light Address” is the Address of the first light of the chain (YYY)

Considering XXX=DMX box address and YYY=DMX Light address

- If the lights are connected together with the box, the start DMX address of the

first light is XXX+YYY-1

- If the lights are connected together without the box, the start DMX address of

the first light is YYY

For example:

If you set Box address = 005 and Light Address = 004

- If the lights are connected together with the box, the start DMX address of the

first light is 005+004-1=008

- If the lights are connected together without the box, the start DMX address of

the first light is 004