User Manual

30
Console control
Connect Max. 30pcs (AC 230V) or 15pcs (AC 110V) lights in chain.
1. Set the bars in DMX mode with the IR remote controller. In this condition the bars will
receive the commands from the DMX controller.
2. The default setting channel is 10 channels and DMX address is Address 001. See page 31
for detailed explanation of DMX settings
Control BOX
Connect Max. 30pcs (AC 230V) or 15pcs (AC 110V) lights in chain.
Set the total number of bars connected (LIGHT NUMBER), the channel mode (CHANNEL),
then, if the bars have to be controlled by a DMX controller, set the DMX address of the box
(BOX ADDRESS) and the DMX address of the bars (LIGHT ADDRESS).
Attention: This function have to be used when one or more of these settings are changed in
the box.
Press the MENU button and Up button or Down button until "DMX" is showed. then press
"ENTER" button. Find the function until "Led modes" is showed, then press ENTER. You will
see two items: "Led Modes Same" or "Led Modes Different".
SAME:
1. AII the lights working with the same function (set DMX channel modes 3 – 4 – 7 or 10).
2. "AUTO MODE": there are twelve modes option.
Send the settings to the bars: go to the menu "LOAD SETTIN" and press "Enter". The blue
AC 230V
DMX CONTROLLER
1
2
30
AC 230V
CONTROL BOX
1
2
30