User Manual

NO DMX BEHAVIOR

FREEZE/BLACKOUT

No DMX working mode

FREEZE: without DMX the projector stays

in the last configuration (this mode does

not work with strobe)

BLACKOUT: without DMX the projector

switches off

Press ENTER and UP/DOWN to

set the specific mode

DEFAULT SETTINGS

FACTORY/USER1/USER2

Load default settings:

FACTORY = LOAD: Factory settings can be

loaded only

USER1 = LOAD/SAVE: user setting that can

be saved and after reloaded

USER2 = LOAD/SAVE: user setting that can

be saved and after reloaded

Press ENTER and UP/DOWN to

set the specific mode

TEMP INFO

VALU: xx C

Value of temperature

FIRMWARE

V.1.02A

Software version

5.2 – MASTER/SLAVE MODE

In this mode, more units can be linked together as a single chain and work in a synchronized

way.

• Link together all the units from the connector DMX OUT to DMX IN.

• Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode

(SLAVE MODE).

• Operate the Master unit in Automatic mode (AUTO RUN – EFFECT MODE) or Static mode

(STSTIC COLOR) to operate the entire system. The entire chain of Slave unit will act as the

Master unit