User Manual

18
5. - SETUP
5.1 – MENU
DMX ADR
1 – 512
DMX Address setting
DMX LOSS
OFF
In case of DMX signal loss, the
projector turns off
HOLD
In case of DMX signal loss, the
projectors hold the last scene
RESET ZOOM
HOMING/DONE
Reset Zoom
MASTER
ON/OFF
Enable/disable Master/slave mode
PERFORM
P-000
Off
P-001
On
P-002
On with strobe
CHANNEL
2-3 Chn
DMX Channels mode
MAIN DIM
000 … 255
Dimmer Manual Setting
FAN
ON
Fan always turn on
AUTO
Auto fan turn on via software
DISPLAY
BACK LIT MODE
Auto 5/10/30/60/ON
Display turn off
BACK LIT LEVEL
000 … 255
Display brightness
FLIPPED
AUTO
Display auto inversion
NORMAL
Display not inverted
FLIPPED
Display inverted
INFO
LED TEMP
LED temperature
HOURS
Usage time
SERIAL
Serial number
SFTVER
Software Version
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
 Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
 Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(SLAU → SLA).
 Operate the Master unit in Automatic mode (AUTO), Macro Color (COLR), Program (PR) or
Musical (SOUD) to operate the entire system. The entire chain of Slave unit will act as the
Master unit.