User Manual

24
MODIFY SCENE
BANK
EDITING
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select Bank with UP / DOWN buttons
3
Select one by one the scanners used in the step and configure one
by one (only ONE SCANNER BUTTON ON)
4
When the total configuration is finished, switch ON all the scanners
used
5
press REC and after press the button of the scene to modify
(overwrite).
COPY SCENE
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select source Bank with UP / DOWN buttons
3
Select the scene to copy
4
Press ADD
5
Select destination Bank with UP / DOWN buttons
6
Select the scene destination (all leds blink)
(4)
DELETE A SCENE
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select Bank with UP / DOWN buttons where the scene will be
deleted
3
Press and hold DEL button + press scene to delete
4
Release Scene and release DEL
(6)
COPY BANK
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select source Bank with UP / DOWN buttons
3
Press ADD
4
Select destination Bank with UP / DOWN buttons
5
Press BANKCOPY (all leds blink)