User Manual

22
OPERATION
(1)
RECORD A SEQUENCES OF SCENES
BANK
RECORD
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select the desired Bank (1 - 30) (last 2 digits on the right on the
display)
3
Select one by one the scanners used in the step and configure one
by one (only ONE SCANNER BUTTON ON)
4
When the total configuration is finished, switch ON all the scanners
used
5
press ADD and after press SCENE 1. All the leds in the controller will
blink
6
repeat the points 3 - 4 - 5 maximum until SCENE 8 (8 scenes in each
Bank)
7
Repeat the points 2 -3 - 4 - 5 - 6 maximum until Bank 30
(2)
RECORD A SEQUENCES OF SCENES ONE CHASE this procedure ONLY
AFTER PROCEDURE (1)
CHASE
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select the chase where you want store the scenes (first digit on the
left on the display)
3
All the scanners buttons OFF
4
select the bank where is the desired scene
5
press the desired scene (between 1 and 8)
6
press ADD
7
repeat points 4 - 5 - 6 until finished the sequence in the chase (max
240 scenes)