User Manual

23
5. - SETUP
5.1 – MENU
DMX ADDRESS
1 – 512
DMX Address
AUTO PLAY
AUTO PROGRAM
MASTER/ALONE
Auto Mode
MUSIC CONTROL
MASTER/ALONE
Sound Mode
RESET
ON/OFF
Unit reset
REVERSE PAN
YES/NO
Pan inversion
REVERSE TILT
YES/NO
Tilt inversion
MIC SENSITIVITY
000% – 099%
Microphone sensitivity regulation
SPECIAL
RESET DEFAULT
ON/OFF
Factory reset
CALIBRATION
PAN – TILT – HEAD1 –
HEAD2
PAN – TILT – HEAD1 – HEAD2
calibration (Password 088)
OFF SIGNAL MODE
RESET STATUS
In case of DMX signal loss, the
projector turns off
HOLD STATUS
In case of DMX signal loss, the
projector hold the last scene
MANUAL CONTROL
Unit manual control
SIGNAL SET
WIRE DMX
Working by DMX cable
WIRELESS DMX
Not used
ACT WDMX & OUT
EDIT PROGRAM
PROGRAM1
SCENES
Scene Programmation
STEPS
MODE OF CHANNEL
STANDARD MODE (55Ch)
DMX Channel Mode
BASIC MODE (15Ch)
EXTENDED MODE (59Ch)
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
 Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
 Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(SLAU → SLA).
 Operate the Master unit in Automatic mode (AUTO), Macro Color (COLR), Program (PR) or
Musical (SOUD) to operate the entire system. The entire chain of Slave unit will act as the
Master unit.