User Manual

21
6.4 – IR controller
7. - MAINTENANCE
To ensure optimal performance, the unit must be frequently cleaned. Unplug the device from
the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner
or an air compressor and a soft brush or a lens cloth to remove the dust deposited.
The lenses, like any other damaged part, must be replaced with original spare parts.
- In order to have a good efficiency of the battery, it is suggested to charge the battery at least
1 time each month
- the best performances of a Litium battery will be after 3 times of charge and discharge
- do not short circuit the poles of the battery in order to avoid overheating or burning. In case
of storage of battery, insulate the two poles
- if the battery is damaged, DO NOT REPAIR. It have to be changed
BLACKOUT
Blackout
R
Dimmer Red adjust via “+” e “-”
G
Dimmer Green adjust via “+” e “-”
B
Dimmer Blue adjust via “+” e “-”
A/W
Dimmer White/Ambra adjust via “+” e “-”
S PR
built-in programs, via “- +” to select the scenes
FL
flash on/off，via “-+” to adjust speed
SP
speed control，via “-+” to adjust the color change speed
and dream speed
D
DMX mode
SA
Sound active
SL
master/slave mode
S
Setting DMX address via 0,1,2, 3 ,4 ,5,6,7,8,9