User Manual

23
SCENE (Step)
INSERT A SCENE:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the desired chase via chase button. The respective led will be lit.
- Press the DISPLAY button in order to switch the display to step. The display will show the
scenes (steps) in the chase.
- Select the scene were the scene will be inserted with BANK UP/DOWN buttons. E.g. if
you want to insert a scene between scene 5 and scene 6, press BANK UP/DOWN buttons
so that the display will show STEP05.
- Press MIDI/REC button to prepare inserting. Now the display will show the next step
(E.g. STEP06)
- Select the bank where the scene will be inserted via the BANK UP/DOWN buttons
- Select the scene you want to copy via SCENES button
- Press MIDI/REC button to insert. All leds on the panel will flash.
COPY A SCENE:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the bank where the scene will be copied via BANK UP/DOWN buttons
- Select the scene to be copied by pressing the respective SCENES button
- Press the MIDI/REC button to prepare copying
- Select the bank where you want to copy the scene, via the BANK UP/DOWN buttons
- Press the desired SCENES button. All leds on the panel will flash.
DELETE A SCENE:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the bank in which a scene will be deleted, via BANK UP/DOWN buttons
- Press and hold the AUTO/DEL button
- Press the SCENES button corresponding to the scene to be deleted
- Now you have deleted the scene. All leds on the panel will flash.
- All 240 DMX channels of the deleted scene will be set to 0.
DELETE ALL SCENES:
Caution: when you select this function, all programmed scenes will be irrevocably lost.
- Press and hold the BANK DOWN and PROGRAM buttons while disconnecting the device
from the mains.
- Connect the device to the mains again.
SOUND CONTROL
- Pressing the MUSIC/BANK COPY button, the Music led will be lit. When the device
receives a music signal, it will work in Sound Control mode.
- Select the bank to be sound controlled via BANK UP/DOWN buttons
- You may adjust the fade time by the FADE TIME fader.
- Press a CHASE button, the chase will be sound controlled. You may press more then one
chase to run them one by one.
- You may adjust the duration time via FADE TIME fader.