User Manual

22
EDITING A CHASER:
Copy a bank into a chase
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the desired chase via the CHASE button. The respective led will be lit.
- Select the bank to be copied vie BANK UP/DOWN buttons
- Press the MUSIC/BANK COPY button to prepare copying
- Press MIDI/REC button to copy the bank. All leds on the panel will flash.
Copy a scene into a chase
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the desired chase via the CHASE button. The respective led will be lit.
- Select the bank in which the scene will be copied vie BANK UP/DOWN buttons
- Select the scene you want to copy via SCENES button
- Press MIDI/REC button to copy the scene. All leds on the panel will flash.
Inserting a scene in a chaser
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the chase in wich a scene will be inserted via BANK UP/DOWN buttons. The
respective led will be lit.
- Press the DISPLAY button in order to switch the display to step.
- Select a scene where a new scene is to be inserted, via BANK UP/DOWN buttons. Now
the display will show the scene. E.g. if you want to insert a scene between scene 5 and
scene 6, press the BANK UP/DOWN buttons so that the display show STEP05.
- Press MIDI/REC to prepare inserting. Now the display will show the next scene.
- Select the bank where the scene to be inserted via BANK UP/DOWN buttons
- Select the scene to be inserted via the SCENES buttons
- Press MIDI/REC button to insert the scene. All leds on the panel will flash.
Deleting a scene in a chase:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the chase in which a scene will be deleted via the CHASE buttons
- Press the DISPLAY button in order to switch the display to step.
- Select the scene to be deleted via the BANK UP/DOWN buttons
- Press AUTO/DEL button to delete the scene All leds on the panel will flash.
DELETE A CHASE:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the chase to be deleted via CHASE buttons
- Press and hold AUTO/DEL button and the respective chaser button to delete the chase.
All leds on the panel will flash.
DELETE ALL CHASE:
- Caution: when you select this function, all program chase will irrevocably be lost. The
individual scenes and programs are maintained
- Switch off the device
- Press and hold the BANK DOWN + DEL buttons, while switching on the device. All leds on
the panel will flash.