User Manual

21
CHECKING A PROGRAM:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the desired program via the BANK UP/DOWN buttons
- Check every scene individually by pressing the respective SCENES button.
EDITING A PROGRAM:
- When programs have to been edited, it is necessary to modify a scene manually.
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the program to be edited via the BANK UP/DOWN buttons
- Select the desired scanner via SCANNERS buttons
- Adjust the desired settings via the respective channel faders.
- Press MIDI/REC button to prepare a saving.
- Select the desired scene via the SCENES button, to save.
COPY A PROGRAM:
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the bank to be copied via the BANK UP/DOWN buttons
- Press MIDI/REC button to prepare saving
- Select the bank where you want to copy the bank, via the BANK UP/DOWN buttons
- Press the MUSIC/BANK COPY button to copy the bank. All leds on the panel will flash.
CHASE
A chase is a sequence of different programs (banks) that will be called up one after another.
With the DMX operator, you can program up to 6 different chases each up to 240 steps.
PROGRAMMING A CHASE
- Press and hold the PROGRAM button for about 2 seconds to enter the programming
mode. The program flash will flash.
- Select the chaser to be programmed via the CHASE buttons
- Select the desired program via the BANK UP/DOWN button
- Select the desired scene via the SCENE buttons
- Press the MIDI/REC button
- Program the next steps until the chase is finished or the maximum number of steps (240)
has been reached
- Press and hold the PROGRAM button in order to save the chase
RUNNING A CHASE:
- Press the respective CHASE button and press the AUTO button.
- You can adjust the chase speed by tapping the DISPLAY button twice. The time interval
between the 2 taps correspond to the chase speed (up to 10 minutes)..
CHECKING A CHASER:
- Press and hold the program button and select the desired chase via the CHASE button.
- Press the DISPLAY button in order to switch the display to step.
- Check every scene individually by pressing the respective BANK UP/DOWN button.