User manual

Chapter 4 Advanced Settings Page 37
adjustment, observe “Current RSSI” in local SGT-LD-55-23. The value will refresh every 1 second.
Fix the remote antenna when it reaches your expectation. Usually, RSSI between -60 and -70dBm
indicates rather good signal strength.
Adjust the local antenna after fixing the remote one. During the adjustment, observe “Current
RSSI” in the remote SGT-LD-55-23. Fix the local antenna when it reaches your expectation.
When the antenna alignment tool starts, the SGT-LD-55-23 will issue a beep sound to indicate
current RSSI. Once the tool is closed the SGT-LD-55-23 will stop beeping. Frequency of beeps
indicate the following RSSI values:
Table 3 RSSI-Beep Frequency
RSSI
Beep Frequency
>-50
100 /sec
-50~-60
50 /sec
-60~-70
5 /sec
-70~-80
2 / sec
-80~-90
1 /sec
< -90
No beep sound