User manual

Chapter 4 Advanced Settings Page 36
Antenna Alignment Tool
This function is available in Peer-to-Peer (CSMA) and Peer-to-Peer TDMA mode. It helps to point in the
approximate direction of the remote SGT-LD-55-23 antenna and assists the user to easily align the local
antenna to achieve maximum signal strength.
Figure 22 Antenna Alignment in CSMA
Figure 28 Antenna Alignment in TDMA
To use Antenna Alignment Tool, follow the steps bellow:
Open “Peer-to-Peer Setup” and select “RF1” or “RF2”. Enter the MAC address of the remote
bridge and click on the Apply button. Then click the “Align Antenna” button and the “Antenna
Alignment Tool” window will popup.
Set the target RSSI (e.g. -70dBm) and click “Start” button.
Wait about 5 seconds, the antenna alignment starts and performs alignment every one second.
Fix the local antenna and adjust the remote antenna elevation and horizontal direction. During the