User manual

Chapter 4 Advanced Settings Page 35
Peer-to-Peer Links
Open “Peer-to-Peer Setup” in “Wireless”. Peer-to-Peer Links allow establishing of PTP or PTMP
connectivity with at most eight remote wireless devices; this feature only available under Peer-to-Peer
(CSMA) mode. Select “RF1”, and input the MAC addresses of radio cards from the remote unit
respectively. Furthermore, you may restrict the uplink speed of each peer for optimal bandwidth control.
Figure 20 Peer-to-Peer Links for CSMA
The other way to establish PTMP connectivity is to setup the same group ID under “Radio” in “Wireless”.
This feature is only available under Peer-to-Peer (TDMA) mode and only devices with the same Group ID
can communicate.
Figure 21 PTP for TDMA
When establishing a PTMP network, make sure all the remote wireless devices are within
the antenna beamwidth.
Note: