User manual

Chapter 4 Advanced Settings Page 33
Chapter 4 Advanced Settings
Advanced Wireless Settings
Open “Radio” in “Wireless” and look at “Advanced Parameters” at the bottom to make advanced
wireless settings.
Figure 19 Advanced Parameters
Radio
To enable or disable Wireless radio interface.
RTS Threshold
The SGT-LD-55-23 sends RTS (Request to Send) frames to certain receiving station and negotiates
the sending of a data frame. After receiving an RTS, that STA responds with a CTS (Clear to Send)
frame to acknowledge the right to start transmission. The setting range is 0-2346 in bytes.
Fragmentation Length
Specify the maximum size in bytes for a packet before data is fragmented into multiple packets.
Setting it too low may result in poor network performance. Leaving it at its default of 2346 is
recommended.
Beacon Interval
Specify the frequency interval to broadcast packets. Enter a value between 20 and 1000.