User manual

Chapter 3 Basic Settings Page 29
VLAN
By enabling VLAN function, the SGT-LD-55-23 is able to operate with the VLANs set up on your
VLAN network.
Management VLAN ID
You need to define a VLAN ID for your SGT-LD-55-23 to be recognized by the VLAN network. The
VLAN ID corresponds to the local ID on your Switch.
System Monitor
By enabling System Monitor, when system errors take place and are detected, a software-triggered
watchdog reset occurs to resume normal operation.
Link Aggregation
Link Aggregation combines two physical network links into a single logical link for increased
bandwidth. Also, it provides load balancing.
IP Address
If you select “Manual”, you have to specify a static IP address, subnet mask, default gateway and
DNS server for your local area network which connects to the LAN port of SGT-LD-55-23. Make
sure the specified IP address is unique on your network in order to prevent IP conflict.
DHCP Client
Enable DHCP client to allow the DHCP server within your local area network to assign an IP address
automatically.