User manual

Chapter 2 Hardware Installation Page 21
Figure 9 Connect Up – Step 2
3. Insert the RJ-45 connector and make sure that the locking tab snaps home.
Figure 10 Connect Up – Step 3
4. Screw the sealing on the gland and tighten.
Figure 11 Connect Up – Step 4
Grounding
The SGT-LD-55-23 is shipped with a grounding wire. The unit must be properly grounded to protect
against power surges. The grounding point can be found on the bottom of the unit. It is supplied
with an appropriate grounding lug for attachment to the ODU.
Figure 12 Grounding
SGT-LD-55-23 RJ-45 Port