User manual

Chapter 4 Advanced Settings Page 37
Peer-to-Peer Links
Open “Peer-to-Peer Setup” in “Wireless”. Peer-to-Peer Links allow establishing PTP or PTMP
connectivity with at most four remote wireless devices; this feature only available under Peer-to-Peer
(CSMA) mode.
Figure 25 Peer-to-Peer Links for CSMA
To setup a Peer-to-Peer link, first login to the Web-based interface of the remote SGT-LD-5-23,
open “About” in “System” and record its wireless MAC address.
Then, login to the Web-based interface of the local SGT-LD-5-23 and open “Peer-to-Peer Setup”
in “Wireless”, input the WLAN MAC address of the remote one to “Remote MAC Address 1” field
and click “Apply”;
To check if the link has been successfully established, you may use ping to justify.