Cut Sheet

6/15/2017 SCE30EL2410LPSaginawControlandEngineering
http://www.saginawcontrol.com/partnumber_info/?n=SCE30EL2410LP# 1/1
Saginaw Control and Engineering
95 Midland Road Saginaw, MI 48638-5770
[phone] - Fax: [phone]
[e-mail]
Construction
 0.075 In. carbon steel.
 Seams continuously welded and ground smooth.
 Flange trough collar around all sides of door opening.
 Oil-resistant gasket.
 Collar studs provided for mounting optional panels.
 Concealed hinges.
 Removable and interchangeable doors.
 Black quarter turn latches.
 Latches are opened or closed with a screwdriver.
 Mounting holes in back of enclosure.
 Mounting hardware, sealing washer and hole plug included.
 Removable print pocket furnished if height and width of enclosure is
greater than 12 inches.
 Ground studs on door and body.
Application
Designed to house electrical and electronic controls, instruments and
components. Provides protection from dust, oil and water. For outdoor
application a drip shield is recommended.
Options
- Optional tamper-resistant inserts are available. - Optional mounting
feet available. - Door hardware available. - Interchangeable latches and
handles available in the accessory section.
Finish
ANSI-61 gray powder coating inside and out. Optional sub-panels are
powder coated white.
Industry Standards - (IS4)
 NEMA Type 3R, 4, 12 and Type 13
 UL Listed Type 3R, 4 and 12
 CSA Type 3R, 4 and 12
 IEC 60529
 IP 66
Notes
Provision for Lifting Lugs will be included on enclosures with Height >48"
and with Depth >16". The Lifting Lug assembly will be included with the
enclosure bolt pack.
Special Instructions apply for IS3, IS4 and IS6 to maintain the
environmental rating of Type 3R for these parts. Instructions are located
on the enclosure door. Drip shield is required on IS3, drip shield is
recommended on IS4 and IS6. Drain holes are required on all.
Optional Accessories
SCE-30P24 Subpanel, Bent
SCE-BVK Breather Vent
SCE-DF30EL24LP Panel, Dead Front (Wall Mount)
SCE-DS24N4 Shield, Drip
SCE-ELFM24W EL Flush Mount Frame
SCE-ELFM30H EL Flush Mount Frame
SCE-ELMFK4 Foot Kit, EL Mounting (4pc.)
SCE-ELSP3 KIT, Swing-Out Panel (20 High & Up)
Similar Part Numbers
SCE-20EL1206LPEL Enclosure
SCE-20EL1606LPEL Enclosure
SCE-20EL1608LPEL Enclosure
SCE-20EL1610LPEL Enclosure
SCE-20EL1612LPEL Enclosure
SCE-20EL2006LPEL Enclosure
SCE-20EL2008LPEL Enclosure
SCE-20EL2010LPEL Enclosure
SCE-20EL2012LPEL Enclosure
SCE-20EL2408LPEL Enclosure
Installation Information
 Mounting Foot Kit for Enviroline Enclosures
 Sealing Washer Specications
 EL Flush Mount Frame
 Drip Shield Kit Assembly
 Drain/Vents
 Dead Front Wall Mount Installation Instructions
 Swing Panel Assembly for Enviroline Enclosures
 Swing Panel ELSP for Encl. Height > 16
 Dead Front Wall Mount < 20 In Height Installation Instructions
 Swing Panel ELSP for Encl. Height <= 16
 Service Parts Wall Mount Enclosures
SCE-30EL2410LP
Product Specications:
Part Number: SCE-30EL2410LP
Description: EL Enclosure
Height: 30.00"
Width: 24.00"
Depth: 10.00"
Price Code: E3
List Price: $355.51
Catalog Page: 70
Est. Ship Weight: 68.00 lbs