User manual

http://www.sapido.com.tw/ User Manual v1.0.0

5.6.10 Route Setup

Dynamic routing is a distance-vector routing protoc ol, which employs the hop count as a

routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed

in a path from the source to a destination. The maximum number of hops allowed for RIP is 15

Static routing is a data communication concept describing one way of configuring path

selection of routers in computer networks. It is the type of routing characterized by the absence of

communication between routers regarding the current topology of the network.This is achieved by

manually adding routes to the router routing table.

Item Description

Enable Dynamic Route Enable or Disable dynamic route

NAT Enable or Disable NAT function

Tran smit

There are 3 options：

1. Disable：do not send any RIP packet out

2. Send RIP1 packet out

3. Send RIP2 packet out

Receive

There are 3 options：

4. Disable：do not receive any RIP packet

5. Only receive RIP1 packet

6. Only receive RIP2 packet