User manual

http://www.sapido.com.tw/ User Manual v1.0.0

Short GI Users can get better wireless transmission efficiency when they

enable this function.

WLAN Partition Shut down the communication between the connected

wireless LAN devices.

If you set up as "Enabled", devices connected with the

router, such as a printer, will not be able to use.

Default Setting: "Disabled"

20/40MHz Coexist Configure 20/40MHz coexisting scheme.

If you set up as "Enabled", "20MHz" and "40MHz" will

coexist.

Normally use as "Disabled".

Default Setting: "Disabled"

RF Output Power Users can adjust RF output power to get the best wireless network

environment. Users can choose from 100%, 70%, 50%, 35%, and

15%.

5.4.3 Security

Here users define the security type and level of the wireless network. Selecting different

methods provides different levels of security. Please note that using any encryption

may cause a significant degradation of data throughput on the wireless link. There

are five Encryption types supported: “None”, “WEP”, “WPA”, ”WPA2”, and “WPA-Mixed”.

Enabling WEP can protect your data from eavesdroppers. If you do not need this feature,

select “None” to skip the following setting

Item Description

WEP WEP is the most general encryption scheme among