System Description

SystemDescriptionandInstallationManualforRangeFinder ICD10000‐01

©SagetechCorporation2018ConfidentialProprietaryExportControlled Page88of130

ReportTimeofApplicability
ByteOffset ByteName FieldDescription
08 RA0 RA1 RA0 ReportTimesofApplicability
09 RA1
0x00
0x28
0x80
0x60
TimeofApplicability:1.0seconds
TimeofApplicability:80.75seconds

ReportTimesofApplicability
Thetwobytesofthismessage(RA0andRA1)containtheReportTimesofApplicability.Thedatais
formattedsuchthatsubfieldisinsecondswitharesolutionof1/128seconds.Forexample,avalueof
0x0058wouldhaveavalueof0.6875seconds..

SelectedAltitudeType
ByteOffset ByteName FieldDescription
10 AT0 AT0 SelectedAltitudeType
 0x00
0x01
0x02‐0xFF
SelectedaltitudederivedfromControlPanel
SelectedaltitudederivedfromFlightManagementSystem(FMS)
Reserved
SelectedAltitudeType
IndicatesthesourceoftheSelectedAltitudedata.

SelectedAltitude
ByteOffset ByteName FieldDescription
11 SA0 SA0 SA1 SelectedAltitude
12 SA1 0x00
0x00
0x00
0x07
0x01
0x02
0x03
0xFF
0feet
32feet
64feet
65472feet

SelectedAltitude
Selectedaltitudeissentinthefollowingformat:dddddddddddwiththemostsignificant5bits
unused.
Selectedaltitudeissentinunitsoffeetwitharesolutionof32feet.
Avalueofzeroisusedtoindicatenodataorinvalid.Therefore,32feetmustbesubtractedfromthe
valueinthefield.

BaroSetting
ByteOffset ByteName FieldDescription
13 BS0 BS0 BS1 BaroSetting
14 BS1 0x00
0x00
0x00
0x01
0x01
0x02
0x03
0xFF
800.0millibars
800.8millibars
801.6millibars
1208.0millibars

BarometricSetting
Barometricsettingissentinthefollowingformat:dddddddddwiththemostsignificant7bits
unused.
Barometricsettingissentinunitsofmillibarswitharesolutionof0.8millibarsandanoffsetof800
millibars.
Avalueofzeroisusedtoindicatenodataorinvalid.Therefore,800millibarsmustbeaddedtothe
valueinthefieldand0.8millibarsmustbesubtracted.
