System Description

SystemDescriptionandInstallationManualforRangeFinder ICD10000‐01

©SagetechCorporation2018ConfidentialProprietaryExportControlled Page87of130

ValidityFlags
ByteOffset ByteName FieldDescription
02 VF0 Byte Bit DataField(s)
03 VF1 VF0 0‐7 Reserved
 VF1 7
6
5
4
0‐3
SelectedAltitude
BarometricPressureSetting
SelectedHeading
MCP/FCUMode
Reserved
ValidityFlags
These flags indicate whether or not the data contained in the specified field is
valid or not. If the bit is set to “ONE” then the data field contains valid
information. If the bit is set to “ZERO” then the data field contains invalid
information.

ParticipantAddress
ByteOffset ByteName FieldDescription
04 PA0 PA0 PA1 PA2 ParticipantAddress
05 PA1 0x1C
0x2A

0xA6
0x35

0xB2
0x6A

1CA6B2
2A356A
06 PA2
 ParticipantAddressBytes
Containstheaddressofthetransmittinginstallation.Thesefieldscontainupto6hexcharacters.This
canbetheICAOaddressorsomeothertypeofaddress.

AddressQualifierDescription
ByteOffset ByteName FieldDescription
07 AQ0 QA0 AddressQualifierDescription
  
AddressQualifierByte
Indicatesthetypeofparticipantaddressbeingreportedandwhattheemittercategoryissettoforthe
givenparticipant.SeeStateVectorReport(section8.4.8.2)forexamples.
