User Manual

ManualsBrandsSagemcom ManualsOtherSaGeMCOM WiFi Router

Page 1

1. Introduction

This F@ST 3686 Cable Gateway is an Embedded Media Terminal Adapter (EMTA) which is CableLabs DOCSIS 3.0 and

PacketCable 1.5 compliant. It provides high-speed Internet access as well as cost-effective, toll-quality telephone voice and

fax/modem services over residential, commercial, and education subscribers on public and private networks via an existing

CATV infrastructure. F@ST 3686 offers high-speed LAN connec tivity with 4 Gigabit Ethernet ports and one integrated

Wireless LAN access point compatible with IEEE 802.11a/b/g/n. The Wireless access point is operating on 2.4GHz band.

Package Contents

F@S T3284u Gateway x1

Ethernet Cable (RJ45) x1

Phone Cable (RJ11) x1

Quick Start Guide x1

Power Supply Unit x1

2. Hardware Connection

3 4 5 6

RJ-11 Telephone port lines 1 and 2

Ethernet 10/100/1000 BaseT RJ-45 connector

Restore To Factory Defaults button

RF coaxial F-connector

Power plug

Power switch ON/OFF

User Manual

F@ST 3686 V2.2

Summary of content (8 pages)

PAGE 1
F@ST 3686 V2.2 User Manual 1. Introduction This F@ST 3686 Cable Gateway is an Embedded Media Terminal Adapter (EMTA) which is CableLabs DOCSIS 3.0 and PacketCable 1.5 compliant. It provides high-speed Internet access as well as cost-effective, toll-quality telephone voice and fax/modem services over residential, commercial, and education subscribers on public and private networks via an existing CATV infrastructure.
PAGE 2
3. Connecting the F@ST3284 Gateway to Your Computer Installation Procedure for Ethernet Interface Follow the steps below for proper installation: 1. Make sure your computer meets the system requirements. 2. Connect a coaxial cable to the wall plug 3. Connect a coaxial cable to the CABLE connector on the F@ST3686 and screw it at the bottom manually (do not force). Note: To speed up the registration process of F@ST3686 , the coaxial cable should be connected to the gateway prior to the power connector.
PAGE 3
4. Wireless Connection Step 1 Step 3 • Under the gateway, on the label, note the reference of SSID and WPA wireless password. o In this new Window, search for the SSID value and select it by double clicking on it. Step 4 Step 2 o The computer asks for a password. It is the WPA wireless password. • Click on “Start” then on: o Network Connection o Wireless network connection o Once the password entered twice, press “Connection” button. WiFi Configuration is finished. 5.
PAGE 4
6. Precautions and Warnings z Before connecting and disconnecting cables, stop using the F@ST3686, and then disconnect it from t he power supply. Ensure that your hands are dry during operation. z Keep the F@ST3686 far from sources of heat and fire, such as a heater or a candle. z Do not block the openings on the F@ST3686 with any object. Reserve a minimum space of 10 cm around the F@ST3686 for heat dissipation. z Place the F@ST3686 on a stable surface in a cool and well-ventilated indoor area.
PAGE 5
Safety and Certifications Important Information about the Sagemcom F@ST3284u: Installation and Safe Usage Instructions: 1. Place the router in a horizontal orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter. The F@ST3686 requires the use of a 12 VDC, 2500 mA power adapter. Only use a manufacturer supplied and approved power adapter and Ethernet cable. 3.
PAGE 6
Safety and Certifications Federal Communications Commission (FCC) Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 7
Safety and Certifications Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 8
Safety and Certifications Issued by Sagemcom Broadband SAS Sagemcom 250, route de l'Empereur - 92500 RUEIL MALMAISON FRANCE © Sagemcom Broadband SAS 2012 All rights reserved. Subject to availability. Rights of modifications reserved. www.sagemcom.