User guide

32
TAM SETTINGS
This menu allows you to change the advanced settings of
your answering machine. You can access the answering
machine SETTINGS menu from the ANS. MACH menu.
ACTIVATING AND DEACTIVATING CALL
SCREENING
The filtering function, when activated, allows you to listen
to the message left by the caller as it is being recorded.
You can unhook to answer at any time.
•Go to ANS. MACH/SETTINGS/CALL SCREENING.
•Press Valid..
• A screen indicating the function status appears.
- To keep the current status, press Valid..
- To change the status, press  or .
•Press Valid..
MODIFYING THE REMOTE ACCESS CODE
The remote access code enables you to listen to the
messages left on your answering machine via another
telephone.
•Go to ANS. MACH / SETTINGS / REMOTE CODE.
•Press Valid..
• CODE BASE is displayed, enter your Base code
(default setting is 0000).
•Press Valid..
• CODE DISTANCE is displayed, enter the new remote
access code (4 digits mandatory).
•Press Valid.. OK is displayed on the screen.
•Press Return to go back to the previous menu.
NUMBER OF RINGS
This parameter determines the number of times your
phone rings before your answering machine is started.
The number of rings is between 3 and 7.
•Go to ANS. MACH / SETTINGS / NO OF RINGS.
•Press Valid..
• The programmed number of rings is displayed on the
screen. Press keys  or  to change this number
(from 3 to 7).
•Press Valid.. OK is displayed on the screen.
•Press Return to go back to the previous menu.
LU Sixty.book Page 32 Mercredi, 19. mai 2010 12:30 12