User's Manual Part 2

Residential Gateway Family User’s Guide Configuring Advanced Features

Wireless Network

Configure the wireless network using this option. The wireless settings on the Gateway must match those

of any wireless clients on your network.

To configure the wireless network:

1. Click the Configure the Local SpeedStream Gateway Wireless Network hyperlink. This displays

the “Wireless Summary” window.

2. Click Begin Wireless Wizard. This displays the “Wireless Setup Configuration” window.

3. Select Enable to enable the Wireless Interface.

4. Type your wireless network ID in SSID (Service Set Identifier).

5. Optionally, select a channel ID from the Channel drop-down menu. This is typically done if you

experience any interference with your wireless Gateway.

6. Click Next. This displays the “Wireless Security Configuration” window.