User manual

- 82 -
MF 6990dn - Agoris C935
12 - PC Functions
Connection status
The status of the connection between the current
peripheral and the PC is indicated by a colour code.
The following table indicates the possible connections
statuses:
Peripheral parameters
1 Select a peripheral by clicking on the correspond-
ing line in the list and click on Properties to config-
ure the scanning settings to apply to this peripheral
when you use the Scan to function.
2 Select the required scan mode from the scroll
down list.
3 Select the required scan resolution from the scroll
down list.
4 Select the required output format from the scroll
down list.
5 Select the required Duplex Mode, by pressing the
check box.
6 Click on OK to confirm the new settings.
Deleting a peripheral
1 Select the peripheral from the list and click on the -
sign or on Remove.
2 To confirm deletion of the peripheral, click on Yes.
To cancel the deletion, click on No.
The peripheral no longer appears in the list.
You can also unregister a PC from the multifunction
machine (see section Unregistering a PC [ 40]).
Displaying the status of consumables
The following information is available in the
Consumables tab:
• current status of consumables;
• number of pages printed;
• number of pages scanned;
• number of pages sent and received.
Colour Status
Yellow Connection in progress.
Green Connection established.
Red The PC cannot connect to the
peripheral.
Check the connection between
the peripheral and the PC.
Option Description
PaperPort
TIFF
When a Scan to PC is done from
the peripheral, the document is
put in TIFF format and saved in
the directory Scan to.
PaperPort
PDF
When a Scan to PC is done from
the peripheral, the document is
put in PDF format and saved in
the directory Scan to.
Mail PDF When a Scan to PC is done from
the peripheral, your email
application is opened and the
document scanned is attached as
an attachment to a new message.
Important: to use this option, a
client email must be configured
on your PC.