User manual

MF 6990dn - Agoris C935

- 81 -

12 - PC Functions

3 The list of peripherals detected on the network ap-

pears. Click on Refresh to update the list.

4 Select your multifunction machine and click on

Next.

5 To define the multifunction machine as the default

printer, click on Yes then click on Next.

6 The following window shows the list of the various

properties of the printer to be installed. Click on

Next.

7 The window indicating that the installation proce-

dure was successful appears. Click on Finish.

8 Enter the name for your PC and click on OK. The

multifunction machine will use this name to identify

your PC.

9 Click on OK.

10 The window indicating that the installation proce-

dure was successful appears. Click on OK.

Selecting the current peripheral

Only one peripheral can be connected at a time.

You can select the current peripheral by clicking on the

radio button corresponding to the peripheral.

Note

The peripherals detected appears with the

following information:

- NetBios name (hardware identifier) or IP

address (network identifier).

- Network name (defined by the user).

To define the name of a peripheral on the lo-

cal network, see the section Local network

settings [



35].

Note

Only peripherals found on the same local

sub-network as the PC are automatically

detected and displayed.