User manual

- 48 -
MF 6990dn - Agoris C935
6 - Photocopying documents
Zoom
The zoom parameter is used to enlarge or reduce the
original document. The zoom value is between 25% and
400%.
The configuration of this function depends on two
parameters, SCALE and ZOOM. The following table
summarizes the possibilities available according to the
defined values:
Simple photocopy
In this case, the default settings are applied.
Cancelling an operation
1 Insert the document to photocopy (see section
Inserting original documents [ 20]).
2 Press COPY.
3 Enter the number of copies required and press OK.
4 Press to photocopy the document in black and
white or to photocopy the document in colour.
User rights
Duplex photocopying
Cancelling an operation
1 Insert the document to photocopy (see section
Inserting original documents [ 20]).
2 Press COPY.
3 Enter the number of copies required and press OK.
> The first settings appear on the screen. Use
OTHER PARAMETERS to access all available
settings.
4 Press DUPLEX.
5 Select the required option from the list. Press OK to
confirm.
6 To change the binding type, press BINDING
EDGE. Select the required option from the list (see
section Binding [ 47]). Press OK to confirm.
7 Press to photocopy the document in black and
white or to photocopy the document in colour.
User rights
Photocopy with toner saving
TONER SAVE mode is used to reduce the quantity of
toner consumed on the page and thus reduce printing
costs.
When using this mode, the consumption of toner is
reduced and the print is lighter.
Cancelling an operation
1 Insert the document to photocopy (see section
Inserting original documents [ 20]).
2 Press COPY.
3 Enter the number of copies required and press OK.
4 Press TONER SAVE.
5 Select the required status from the list.
6 Press OK to confirm the new setting.
SCALE ZOOM
1:1 Inactive
ZOOM The zoom value is defined in the
ZOOM parameter. This value
can be entered or selected from
the list of predefined values.
FORMAT
CONVERS.
Scaling is automatic depending
on the paper formats defined in
the SCAN FORMAT and
PRINTED PAPER parameters.
Note
You may cancel an operation at any time by
pressing .
Note
Access to functions depends on your user
rights. To know which rights you have, con-
sult your machine administrator.
Note
You may cancel an operation at any time by
pressing .
Duplex mode Description
DUPLEX ->
DUPLEX
input document duplex
output document duplex
FRONT ->
DUPLEX
input document reverse side only
output document duplex
DUPLEX ->
FRONT
input document duplex
output document reverse side
only
FRONT ->
FRONT
input document reverse side only
output document reverse side
only
Note
Access to functions depends on your user
rights. To know which rights you have, con-
sult your machine administrator.
Note
You may cancel an operation at any time by
pressing .