User manual

- 36 -
MF 6990dn - Agoris C935
4 - Configuring the machine and the services
Manual configuration of the Ethernet network
To manually configure the machine, you must first avail of
the usual information used to configure a peripheral on
the local network (IP address, subnet mask and gateway
address).
To manually configure the machine's local network
settings:
1 Press MENU.
2 Select SETTINGS > COMMUNICATION > LOCAL
NETWORK.
> The first settings appear on the screen. Use
OTHER PARAMETERS to access all available
settings.
3 Press ADDR. ALLOCATION.
4 Select MANUAL from the options available in the
list. Press OK to confirm the new setting.
5 Press IP ADDRESS.
6 Enter the machine's IP address using the virtual
keyboard or the keypad. Press OK to confirm the
new setting.
7 Press SUBNET MASK.
8 Enter the machine's subnet mask using the virtual
keyboard or the keypad. Press OK to confirm the
new setting.
9 Press GATEWAY.
10 Enter the network gateway IP address using the
virtual keyboard or the keypad. Press OK to con-
firm the new setting.
11 Press PRIMARY DNS.
12 Enter the IP address of the primary DNS server us-
ing the virtual keyboard or the keypad. Press OK to
confirm the new setting.
13 Press SECONDARY DNS.
14 Enter the IP address of the secondary DNS server
using the virtual keyboard or the keypad. Press OK
to confirm the new setting.
15 Press WINS 1 SERVER.
16 Enter the IP address of the WINS1 server using the
virtual keyboard or the keypad. Press OK to con-
firm the new setting.
17 Press WINS 2 SERVER.
18 Enter the IP address of the WINS2 server using the
virtual keyboard or the keypad. Press
OK to con-
firm the new setting.
IEEE (or Ethernet address) or MAC address
The machine's Ethernet interface already contains an
IEEE address that cannot be modified, but only consulted.
1 Press MENU.
2 Select SETTINGS > COMMUNICATION > LOCAL
NETWORK.
> The machine's IEEE address is displayed in the
IEEE ADDRESS network setting.
3 Press MENU to return to the home screen.
NetBIOS names
NetBIOS names, which can be used with network options,
are used to identify the machine from a PC connected on
a local network (for example with the name «IMP-
NETWORK-1»).
1 Press MENU.
2 Select SETTINGS > COMMUNICATION > LOCAL
NETWORK.
3 Press 1st NETBIOS NAME or 2nd NETBIOS
NAME.
4 Enter the name using the virtual keyboard (maxi-
mum 15 characters). In the event of an error, use
the key to delete a character. Press OK to
confirm the new setting.
5 Press MENU to return to the home screen.
Ethernet network communication speed
By default, the machine is configured to adapt its
communication speed automatically to that of the
Ethernet network. However, you can specify the
communication speed to be used on the Ethernet
network.
1 Press MENU.
2 Select SETTINGS > COMMUNICATION > LOCAL
NETWORK.
3 Press SPEED.
4 Select the communication speed required from the
options available in the list: AUTOMATIC, 100
FULL DUPLEX, 100 HALF DUPLEX, 10 FULL
DUPLEX and 10 HALF DUPLEX. Use the up and
down arrows to view all available options. Press
OK to confirm the new setting.
5 Press MENU to return to the home screen.
Note
The servers WINS1 and WINS2, used with
the network options, are used to access ma-
chines on other sub-networks using their
NetBIOS names.
These addresses must be entered for the
Scan to File function.
Note
If the machine is set to automatic configura-
tion (see Automatic configuration of the
Ethernet network [  35]), these addresses
may be filled automatically by some DHCP
servers.