User manual

MF 6990dn - Agoris C935
- 27 -
4 - Configuring the machine and the services
PC printing parameters
To personalize PC printing parameters:
1 Press MENU.
2 Select SETTINGS > SCANNER/PRINTER > PC
PRINT.
3 Make the necessary adjustment(s).
4 Press MENU to return to the home screen.
Default paper tray
This parameter allows to define the default paper tray of
the machine. All printing operations on the machine will
use this tray (Copy, fax reception, printing report,...). The
machine never switches to another tray except for PC
printing requirement. In this case, the user can choose
another tray from the printing driver.
To define the default paper tray:
1 Press MENU.
2 Select SETTINGS > SCANNER/PRINTER >
PAPER TRAY.
3 Select the required option from the list. Press OK to
confirm the new setting.
4 Press MENU to return to the home screen.
Parameters Description / Procedure
TONER SAVE Lightens printing to save toner
cartridge ink.
TASK DELAY Waiting time for data from the
PC before the PC print task is
cancelled.
FONTS This parameter is used to draw
up the set of symbols. The
possible values are between
CS1 and CS30 included. The
default value is CS1 (Roman8).
FONT NUMBER Start printing the list of fonts.
This parameter can be used to
set the default PCL font. The
possible values are between 1
and 77 included. The default
value is 1.
LINES PER PAGE This parameter is used to set the
number of lines per page.
This variable is linked to the PJL
variables: PAPER and
ORIENTATION. If you change
one of these variables, the Line
format variable is automatically
updated (only for the current
print task) in order to respect the
same spacing.
The possible values are
between 5 and 128 included.
The default value is 60.
FONT SPACING This parameter is used to set the
default font spacing in
characters per inch (the default
font must be non-proportional).
The possible values are
between 0.44 and 99.99
included. The default value is
10.00.
FONT SIZE This parameter is used to set the
default font height, in points (the
default font must be
proportional). The possible
values are between 4.00 and
999.75 (in intervals of 0.25). The
default value is 12.00.
ORIENTATION This parameter is used to set the
page orientation: portrait or
landscape. The default value is
"portrait".
Parameters Description
AUTOMATIC Tray 1 is used by default, then
tray 2, then tray 3 and tray 4.
TRAY 1 Tray 1 is used for all operations
performed on the machine. The
machine never switches to
another tray except for PC
printing requirement.
TRAY 2 Tray 2 is used for all operations
performed on the machine. The
machine never switches to
another tray except for PC
printing requirement.
TRAY 3
(if installed)
Tray 3 is used for all operations
performed on the machine. The
machine never switches to
another tray except for PC
printing requirement.
TRAY 4
(if installed)
Tray 4 is used for all operations
performed on the machine. The
machine never switches to
another tray except for PC
printing requirement.