User manual
- 26 -
MF 6990dn - Agoris C935
4 - Configuring the machine and the services
Paper settings
The machine automatically detects standard paper
formats. You may however use this setting to check and/
or specify the paper type and format in each paper tray.
Defining the paper format
1 Press MENU.
2 Select PAPER > FORMAT.
3 Define the paper format for each tray on the ma-
chine. To select the right format of paper to use,
consult the section Which paper formats can be
used [ 146].
4 Press MENU to return to the home screen.
Defining the paper type
1 Press MENU.
2 Select PAPER > TYPE.
3 Define the paper type for each tray on the machine.
To select the right type of paper to use, consult the
section Recommendations for paper [ 146].
4 Press MENU to return to the home screen.
Scanner / Printer Settings
Scanner / Printer paper format
The paper format defined in this menu becomes the
default format of the main printing paper tray and the
flatbed scanner.
1 Press MENU.
2 Select SETTINGS > SCANNER/PRINTER >
PAPER FORMAT.
3 Select the required format from the list: A4 or LET-
TER. Press OK to confirm the new setting.
4 Press MENU to return to the home screen.
Adjusting Scanner / Printer margins
If you notice an offset between the printer and the
scanner, correct the margins (expressed in pixels)
according to the reference paper specified in SETTINGS
> SCANNER/PRINTER > PAPER FORMAT.
To correct and adjust the scanner / printer margins:
1 Press MENU.
2 Select SETTINGS > SCANNER/PRINTER >
ADJUSTMENTS.
3 Make the necessary adjustment(s).
4 Press MENU to return to the home screen.
To define the paper
format...
then...
in the main tray 1 Press TRAY 1.
2 Select the required
format from the list.
3 Press OK to confirm.
on the additional tray(s) 1 Press TRAY 2 or
TRAY 3.
2 Select the required
format from the list.
3 Press OK to confirm.
To define the paper
type
then...
in the main tray 1 Press TRAY 1.
2 Select the required pa-
per type from the list.
3 Press OK to confirm.
on the manual feeder. 1 Press MANUAL
TRAY.
2 Select the required pa-
per type from the list.
3 Press OK to confirm.
on the additional tray(s) 1 Press TRAY 2 or
TRAY 3.
2 Select the required pa-
per type from the list.
3 Press OK to confirm.
Setting Description / Procedure
Printer top margin Press TOP PRINTER.
Enter an offset value of between
-100 and +100.
Press OK to confirm.
Printer left margin Press LEFT PRINTER.
Enter an offset value of between
-100 and +100.
Press OK to confirm.
Flatbed scanner
top margin
Press TOP FB SCANNER.
Enter an offset value of between
-100 and +100.
Press OK to confirm.
Flatbed scanner
left margin
Press LEFT FB SCANNER.
Enter an offset value of between
-100 and +100.
Press OK to confirm.
Autofeed scanner
top margin
Press TOP ADF SCANNER.
Enter an offset value of between
-100 and +100.
Press OK to confirm.
Autofeed scanner
left margin
Press LEFT ADF SCANNER.
Enter an offset value of between
-100 and +100.
Press OK to confirm.