User manual

- 16 -
MF 6990dn - Agoris C935
2 - Installation
To set the machine's number and name, required for the
fax function:
1 In the menu GENERAL, press FAX.
2 Press PHONE NUMBER. Enter the number using
the virtual keyboard. Press OK to confirm the new
setting.
3 Press NAME. Enter the machine's name using the
virtual keyboard. Press OK to confirm the new set-
ting.
4 In the navigation path at the top of the screen,
press SETTINGS to return to the higher menu.
To run an automatic configuration of the Ethernet
network (automatic allocation of the IP address via the
DHCP server):
1 In the menu SETTINGS, press COMMUNICATION
> LOCAL NETWORK > ADDR. ALLOCATION.
2 Select AUTOMATIC from the options available in
the list. Press OK to confirm the new setting.
> The machine will search for a DHCP or BOOTP
server on the local network that can dynamically
allocate its network settings.
> This operation may take a few minutes.
3 Check that the parameters IP ADDRESS,
SUBNET MASK, GATEWAY, PRIMARY DNS,
SECONDARY DNS, WINS 1 SERVER et WINS 2
SERVER are correctly entered. If this is not the
case, you will have to configure them manually.
4 Press MENU to return to the home screen.
To check and / or specify the paper type and format in
each paper tray:
1 Press PAPER.
2 Press FORMAT. Check that the paper format de-
tected in each tray is correctly entered. To correct
a paper format, press on the corresponding tray;
select the required format from the list and press
OK to confirm.
3
Press TYPE. Check that the paper type detected in
each tray is correctly entered. To correct a paper
type, press on the corresponding tray, select the re-
quired paper type from the list and press OK to
confirm.
4 Press MENU to return to the home screen.
Consult the section Configuring the machine and services
[ 23] for more available parameters, and to configure the
machine according to your specific needs.