User manual

- 151 -
MF 6990dn - Agoris C935
16 - Characteristics
Glossy
First test the glossy media to be used to ensure acceptable print quality and speed.
Recommendations for use
Avoid mixing glossy media with other media in the manual feeder so as not to create jams.
Printable surface
Each media has its own printable surface, the maximum surface which can be printed clearly without distortion.
This surface is limited by two hardware constraints, the size of the media and the margins required by the printer and
a software constraint, the memory available for the full page frame buffer. Whatever the media, the guaranteed print
surface corresponds to the size of the media minus 4 mm from each edge.
On Banner paper, the bottom margin is 10 mm.
Printable surface for envelopes
Envelopes have a flap zone that is not guaranteed which varies according to type.
Page margins
The margins are defined in the computer application. When the application allows, personalise the margins taking
account of the guaranteed printable surface.
Main and additional paper tray Manual feeder
Capacity Not supported Up to 20 glossy sheets depending on
thickness.
Orientation Not supported Print side facing down
Driver Glossy 1
Glossy 2
Weight 100 to 158 g/m² (26.5 to 42 lb)
Duplex Not supported
Marker Description
1 Non printable surface 4 mm (0.157")
2 Surface not guaranteed
3 Surface guaranteed