User manual

MF 6990dn - Agoris C935
- 15 -
2 - Installation
Starting up the machine
Connecting the machine
1 Connect one end of the telephone cable to the ma-
chine socket and the other to the wall telephone
socket.
2 Connect one end of the LAN network cable (not
supplied) to the machine port and the other to your
local network port for the machine.
3 Ensure that the On/Off button is on Off (position 0).
4 Connect the mains cable to the machine. Connect
the mains cable to the wall socket.
5 Press the On/Off button to switch the machine on
(position I).
Initial configuration of the machine
After a few seconds, when the printer preheating phase is
complete, the home screen is displayed.
In this section, you will find the initial settings to be
configured to be able to use your machine's basic
functions:
• geographic settings (country, language, communica-
tion network);
• date / time settings;
• fax settings (machine name and number);
• local network settings (automatic configuration of the
Ethernet network);
• paper settings.
To configure the geographic settings:
1 Press the MENU key.
2 Press SETTINGS > GENERAL >
GEOGRAPHICAL > COUNTRY.
3 Select the required country from the list. Use the up
and down arrows to scroll through the available
countries. Press OK to confirm the new setting.
> Choosing the country automatically configures
the machine's default language and the telecom-
munications network.
4 In the navigation path at the top of the screen,
press GENERAL to return to the previous menu.
To set the machine’s date and time:
1 In the menu GENERAL, press DATE AND TIME.
2 Press TIME. Enter the time using the virtual key-
board. Press OK to confirm the new setting.
3 Press DATE. Enter the date using the virtual key-
board. Press OK to confirm the new setting.
4 In the navigation path at the top of the screen,
press GENERAL to return to the previous menu.
WARNING
Before connecting the mains cable, you
must consult the Safety Instructions [  119].
WARNING
The mains cable is used to disconnect the
machine from the power supply. As a pre-
caution, the mains power socket must be lo-
cated near the machine and easily
accessible in the event of danger.
Note
This section will help you to first configure
the machine, assuming the use of a direct
telephone line on the PSTN network, and an
Ethernet configuration via a DHCP server
with automatic allocation of IP address.
Consult the section Configuring the
machine and services [
 23] if you want to
configure the machine differently.