User manual

- 12 -
MF 6990dn - Agoris C935
2 - Installation
2 Move the paper guides apart to the maximum.
3 Press the centre of the sheet compression flap until
the locking tabs (white) on the right and left are re-
leased.
4 Load the sheets into the paper tray with the print
surface facing up.
5 Make sure the paper does not exceed the fill limit.
6 Adjust the paper guides against the side of the pile.
7 Define the paper format and type used in the ma-
chine.
> The machine automatically detects standard paper
formats. To check / define the format and type of pa-
per loaded, consult the section Paper settings [ 26].
Loading envelopes into the manual feeder
1 Open the right side cover by pulling on the latch.
2 Turn the cursors on the fuser unit so that the enve-
lope symbol is selected.
Note
The tray can contain up to 100 sheets of
standard paper (80g/m² [22lb]).