Technology in action http://www.sagem.com All characteristics contained in this manual are meant for information only and are subject to change without notice.
DIGITAL TERRESTRIAL TV RECEIVER WITH PHOTO CARD READER ITD 66 USER MANUAL ENGLISH Technology in action
QUICK START CONGRATULATIONS! This new generation of Set Top Box gives you access to new digital services and makes it easy for you and your family to choose the very best experiences of Digital TV. Once you have connected your Set Top Box and adjusted it according to your preference, you can enjoy all the services. You can update your Set Top Box through the antenna stream as new functions and services become available. Sagem set top box operates a policy of continuous development.
QUICK START Connection diagram • ITD 66 Green/Red IR sensor Compact Flash* Sagem Adapter XD Card* Secure Digital* Multi Media* Smart Media* Memory Stick* The card reader accept CFI and CFII The card reader adapter accept SMTM (smart media), MSTM (memory stick), MSPROTM (memory stick pro), SDTM (secure digital), MMCTM (multimedia card), XDTM Card Note: If it is not fully inserted, the « memory card » will not work It is better to remove the « memory card » after return in tv mode Don’t insert two cards
QUICK START Installation Guide r r r r r r r r r r r r r r Getting Started Unpack your SAGEM free to view digital receiver and check for the following accessories : User Manual, remote control, batteries, power cable, scart cord and memory card adapter. Disconnect power to all your existing equipment. Locate product in preferred position. Connect all equipment as shown in the diagram on the adjacent page. Finally, once all other connections are made, connect power and switch on your television set.
CONTENTS QUICK START ................................................................................................................... I 1. GENERAL INFORMATION........................................................................................... 1 1-1 Safety ................................................................................................................... 1 1-2 Packing list ...........................................................................................................
CONTENTS 5-3 Audio/video installation......................................................................................... 9 5-3-1 TV.................................................................................................................. 9 5-4 Reinstallation - Reset ............................................................................................9 6. USER SETTINGS .......................................................................................................
1. GENERAL INFORMATION 1-1 SAFETY Use of your Set Top Box is subject to safety measures designed to protect users and their environment. In order to keep the high performance of your Set Top Box, it should: • be located in an indoor place to protect it from lightning, rain and direct sunlight, • be located in a dry and well-ventilated place, • be protected from damp, • be installed in a way to avoid violent shocks, • be plugged directly into the mains with the cords provided with the Set Top Box.
2. GENERAL DESCRIPTION 2-1 FRONT PANEL DESCRIPTION Photo card reader Red LED Green LED . Green/Red IR sensor Stand-by mode. Reception of commands from remote control. 2-2 REAR PANEL DESCRIPTION A B C D E F G A – Connector for external AC/DC adapter B – Scart socket for VCR/AUX connection C – Scart socket for TV set connection D – DIGITAL audio output E – Mini jack for audio L/R output F – RF Output for TV G – Aerial input .
2.
3. CONNECTIONS 3-1 INTRODUCTION There are several ways of connecting the Set Top Box to your audio/TV system. Some of the methods enable you to listen to music in stereo sound of CD like quality. Consult your local supplier for assistance in setting up an audio/video configuration best suited to your unique requirements. Warning: Disconnect the Set Top Box from the mains before connecting or disconnecting any device to it.
4. FIRST TIME INSTALLATION 4-1 GENERAL INFORMATION Once you have correctly connected the Set Top Box, you also have to perform a “First time installation”. During this procedure, helpful information is displayed at the bottom of the menus. Please note! The button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be entered in a menu.
4. FIRST TIME INSTALLATION 4-4 COUNTRY • Select the desired country with cursors . This will also set the current time. and 4-5 CHANNEL SEARCH IN PROGRESS This menu will be shown as the Set Top Box is searching for TV and radio channels. Please note that the search procedure may take a few minutes. You can cancel the search at any time by pressing EXIT. When the search procedure has ended, a message will indicate how many TV and radio channels have been found.
5. ADVANCED BOX SETTINGS 5-1 PRELIMINARY / INSTALLATION CODE Your Set Top Box is supplied ready to use for a standard configuration. TV : 4/3 format, RGB VCR : PAL Access to the installation screens shown below will enable you to adapt your Set Top Box to your favourite equipment. Generally, access to set up in main menu is obtained by pressing the MENU key. You can memorise your selections by pressing the key. Return to the previous screen by pressing the BACK key.
5. ADVANCED BOX SETTINGS 5-2 CHANNEL SEARCH: AUTO TUNE This installation will complete list A with all the channels found during the scanning of all the frequencies. This list is a summary of all the channels and will not be modified. It will be possible to create personal lists based on this reference list, also called list A (see chapter 6.4). It would be advisable to launch a channel search monthly in order to keep your Set Top Box up to date. Press enter channel tuning.
5. ADVANCED BOX SETTINGS 5-3 AUDIO/VIDEO INSTALLATION Press for access to this menu. BOX SETTINGS > CHANNEL TUNING TV AND VCR SETTING RESET 5-3-1 TV A number of choices are available. Scroll through the choices using cursors or . • TV format (aspect ratio): 4/3 Panscan, 4/3 Letter box or 16/9. • TV RGB output: medium, low or high at your convenience. • TV RGB output: none if you want to have PAL video output.
6. USER SETTINGS 6-1 LANGUAGE SETTING USER SETTINGS Press for access to various configurations. Select LANGUAGE SETTING and press confirm to • MENU LANGUAGE You may select the menu display language. • MAIN AND ALTERNATIVE AUDIO LANGUAGES If more than one audio language is transmitted, you may select the main and the alternative languages. • SUBTITLES If more than one subtitle is transmitted, you may select the main and the alternative subtitles.
6. USER SETTINGS 6-3 FAVOURITE LISTS INSTALLATION This function will enable you to make up a FAVOURITE list of the TV or radio type from the reference list A (built from provider (transponder) installation or a scanning) and erase it entirely to reconstruct a new one. CREATION Two lists are displayed simultaneously. • The list on the right side is the reference list (issued from transponder or scanning installation). • The list on the left side is the list under construction.
6. USER SETTINGS 6-4 LOCKING LOCKING CHANNELS TO LOCK LOCK BOX NO LOCK CHANNELS CHANNELS TO LOCK YES 1 2 3 4 5 6 7 8 9 10 TEST 1 TEST 2 Demineur Frogs Tennis Bloomberg... d'Travelo ˝i... CNN Int. TV 5 ARTE 11 12 13 14 15 16 17 DW-TV COMEDIE ! TWC 1 - ZIK... TW 2 - ... TW 3 - LCP TW 4 - ... TWC 5 - ... 4 types of locking are provided: • Select Lock Box (yes/no) for general locking. This represents the highest Set Top Box locking level.
6. USER SETTINGS 6-5 CHANGING PROTECTION CODE CHANGE INSTALLATION CODE Enter your new code. The first segment blinks until its value is entered, then the second segment blinks, etc. As soon as the value has been entered, the segment is replaced with a star. Use cursor NEW CODE CONFIRMATION ---- on the remote control unit to come back to a value that has been entered and modify it until the whole is confirmed by .
7. USING YOUR SET TOP BOX 7-1 CHANNEL CHANGE The Set Top Box provides several ways of channel switching: • Using and on the remote control unit: The Set Top Box switches to the next service up ( ( ) or the next service down ) from the current channel. Type in a single digit (1), which is displayed on the screen banner, e.g.“1--”.
7. USING YOUR SET TOP BOX 7-2 PROGRAM INFORMATION Every time you change channels, you will receive program information for a few seconds (in the User preferences menu, you can select how long this information will be shown).
7. USING YOUR SET TOP BOX If the icon is displayed (see D), an extended summary is available. Press INFO to display it. Use cursors and to switch between the current and the next program information. When there is a lot of text information, use cursors and to continue reading on the next info page.You can see another channel information by pressing cursors and . Graupapageien sind zumeist sehr konservative Vˆgel, die sich am wohlsten in ihrer gewohnten Umgebung f¸hlen.
7. USING YOUR SET TOP BOX 7-5-2 Subtitle language When available, you can select among different subtitle languages. • Each time you press one of these two keys, you change language. • A time out automatically closes this menu. • The number on the left of each language indicates how many languages are available on this current channel. 7-6 VOLUME ADJUSTMENT To increase or reduce the volume, use cursor To turn off the sound quickly, press the or . mute key. Press the mute key again to restore the sound.
7. USING YOUR SET TOP BOX 7-9-1 Sleep timer Enter the selected sleep hour. Confirm with . SLEEP TIMER SLEEP TIME > 01:15 CONFIRM PROGRAMMING CANCEL PROGRAMMING 7-9-2 Events timer This function is for future inovative use. You can make the Set Top Box start and stop at a predefined time. The timer function is very useful when you want to record a program and you are unable to start/stop the recording event yourself, or when you just want to be reminded of the start of a program you do not want to miss.
7. USING YOUR SET TOP BOX 7-10 ENHANCED PROGRAM GUIDE To display more detailed information about a selected program, press the key. To remove this information, press EXIT key. A Resized video is displayed. This video is the current one before entering the EPG. B Channels list of the current list is displayed. Select the chosen channel with and and see the associated resized video by pressing .
7. USING YOUR SET TOP BOX 7-12 RADIO MODE Press the Top Box. key on the remote control unit of the Set You can move through the list displayed using and . You can adjust the volume. 7-13 PHOTO VIEWER Playing a memory card: You can launch PHOTO VIEWER by: - Inserting a memory card - Selecting “PHOTO VIEWER” function in the main MENU. The total number of pictures is read and an album screen preview is displayed. Note: If an event timer is in course you can’t play a memory card.
7. USING YOUR SET TOP BOX Photo Album Configuration: Repeat : Yes to return from the last picture to the first one in slideshow mode. Display duration: Duration of display between two pictures during slideshow (3s to 20s) Help Banner: Display help banner during few seconds when a picture is display. Put no if you don’t want the help banner.
7. USING YOUR SET TOP BOX Picture rotation: Yellow key: Rotation of the picture in the left direction Blue key: Rotation of the picture in the right direction Picture display: Green key: You can show all the picture in the TV or display a part of the picture in all the TV. Slide show: Push STILL key to run or stop slide show mode. Note: - Use or to change faster the picture displayed - You can use yellow or blue keys during slideshow to rotate left or right.
7. USING YOUR SET TOP BOX 7-14 SET TOP BOX ENHANCEMENT The Set Top Box goes in this state when a new version of software is available on the network after startup. • Red led flashes. • The Welcome screen is displayed. DOWNLOAD PROCESS Then a screen for “ download process ” request is displayed. IN ORDER TO IMPROVE THE BOX FONCTIONNALITIES You can delay the downloading process by pressing the A DOWNLOAD OF SOFTWARE IS NECESSARY. IT TAKES A FEW MINUTES. EXIT key.
7. USING YOUR SET TOP BOX 7-16 OUTLINE SPECIFICATIONS Transmission standards Video Decoder External Power supply DVB-T, MPEG 2, OFDM MPEG-2 ( ISO/IEC 13818-2) Profile level: MP@ ML Input rates: 1.5 to 15 Mbit/s Aspect Ratio: 4:3 and 16:9 Video resolution: 720x576, 704x576, 544x576, 480x576, 352x576, 352x288 Conversion: Pan and Scan, Letter box Resizing: Down/Up (1/4, 1/16) AC : 220-240 V ~50 Hz Output : 12 V DC 700 mA Power consumption max.
7. USING YOUR SET TOP BOX 7-17 GUARANTEE (TERMS AND CONDITIONS) ATTENTION In order to apply the guarantee, you should contact your dealer or SAGEM helpdesk at 0870 2488227. Proof of purchase will be required. Should any malfunctioning arise, the dealer or SAGEM helpdesk will advise you what to do.
