0/11/04 9:24 Page 1 ind. B ITD61_UK.qxd Technology in action http://www.sagem.com All characteristics contained in this manual are meant for information only and are subject to change without notice.
ITD61_UK.
ITD61_UK.qxd 10/11/04 9:24 Page 3 QUICK START CONGRATULATIONS! This new generation of Set Top Box gives you access to new digital services and makes it easy for you and your family to choose the very best experiences of Digital TV. Once you have connected your Set Top Box and adjusted it according to your preference, you can enjoy all the services. You can update your Set Top Box through the antenna stream as new functions and services become available.
ITD61_UK.
ITD61_UK.qxd 10/11/04 9:24 Page 5 QUICK START Installation Guide r r r r r r r r r r r r r Getting Started Unpack your SAGEM free to view digital receiver and check for the following accessories : User Manual, remote control, batteries and power cable. Disconnect power to all your existing equipment. Locate product in preferred position. Connect all equipment as shown in the diagram on the adjacent page. Finally, once all other connections are made, connect power and switch on your television set.
ITD61_UK.qxd 10/11/04 9:24 Page 6 CONTENTS QUICK START ................................................................................................................... I 1. GENERAL INFORMATION........................................................................................... 1 1-1 Safety ................................................................................................................... 1 1-2 Packing list .........................................................................
ITD61_UK.qxd 10/11/04 9:24 Page 7 CONTENTS 5-3 Audio/video installation......................................................................................... 9 5-3-1 TV.................................................................................................................. 9 5-3-2 VCR (Not available on ITD 60/ITD 58) ......................................................... 9 5-3-3 Modulator (Only ITD 60) ..............................................................................
ITD61_UK.qxd 10/11/04 9:24 Page 8 1. GENERAL INFORMATION 1-1 SAFETY Use of your Set Top Box is subject to safety measures designed to protect users and their environment.
ITD61_UK.qxd 10/11/04 9:24 Page 9 2. GENERAL DESCRIPTION 2-1 FRONT PANEL DESCRIPTION Green/Red IR sensor Red LED Stand-by mode. Green LEDReception of commands from remote control. Smart Card readers not available on this product . 2-2 REAR PANEL DESCRIPTION A B C D E F A – Connector for external AC/DC adapter B – Scart socket for VCR/AUX connection (*) C – Scart socket for TV set connection D – mini jack 3.
ITD61_UK.qxd 10/11/04 9:24 Page 10 2.
ITD61_UK.qxd 10/11/04 9:24 Page 11 3. CONNECTIONS 3-1 INTRODUCTION There are several ways of connecting the Set Top Box to your audio/TV system. Some of the methods enable you to listen to music in stereo sound of CD like quality (ITD 64 only). Consult your local supplier for assistance in setting up an audio/video configuration best suited to your unique requirements. Warning: Disconnect the Set Top Box from the mains before connecting or disconnecting any device to it.
ITD61_UK.qxd 10/11/04 9:24 Page 12 4. FIRST TIME INSTALLATION 4-1 GENERAL INFORMATION Once you have correctly connected the Set Top Box, you also have to perform a “First time installation”. During this procedure, helpful information is displayed at the bottom of the menus. Please note! The button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process.
ITD61_UK.qxd 10/11/04 9:24 Page 13 4. FIRST TIME INSTALLATION 4-4 COUNTRY • Select the desired country with cursors . This will also set the current time. and 4-5 CHANNEL SEARCH IN PROGRESS This menu will be shown as the Set Top Box is searching for TV and radio channels. Please note that the search procedure may take a few minutes. You can cancel the search at any time by pressing EXIT. When the search procedure has ended, a message will indicate how many TV and radio channels have been found.
ITD61_UK.qxd 10/11/04 9:24 Page 14 5. ADVANCED BOX SETTINGS 5-1 PRELIMINARY / INSTALLATION CODE Your Set Top Box is supplied ready to use for a standard configuration. TV : 4/3 format, RGB VCR : PAL (none on ITD60/ITD 58) Access to the installation screens shown below will enable you to adapt your Set Top Box to your favourite equipment. Generally, access to set up in main menu is obtained by pressing the MENU key. You can memorise your selections by pressing the key.
ITD61_UK.qxd 10/11/04 9:24 Page 15 5. ADVANCED BOX SETTINGS 5-2 CHANNEL SEARCH: AUTO TUNE This installation will complete list A with all the channels found during the scanning of all the frequencies. This list is a summary of all the channels and will not be modified. It will be possible to create personal lists based on this reference list, also called list A (see chapter 6.4). It would be advisable to launch a channel search monthly in order to keep your Set Top Box up to date.
ITD61_UK.qxd 10/11/04 9:24 Page 16 5. ADVANCED BOX SETTINGS 5-3 AUDIO/VIDEO INSTALLATION Press for access to this menu. BOX SETTINGS > CHANNEL TUNING TV AND VCR SETTING RESET 5-3-1 TV A number of choices are available. TV AND VCR SETTING Scroll through the choices using cursors or . • TV format (aspect ratio): 4/3 or 16/9. • TV RGB output: medium, low or high at your convenience. • TV RGB output: none if you want to have PAL video output.
ITD61_UK.qxd 10/11/04 9:24 Page 17 5. ADVANCED BOX SETTINGS 5-3-3 Modulator (Only ITD60) If you want to adjust the channel for an another TV set: • directly access the menu, • choose the channel (21 to 69) by entering the number, • choose the standard of your country (B/G, I or K). The channel is factory set to 38.
ITD61_UK.qxd 10/11/04 9:25 Page 18 6. USER SETTINGS 6-1 LANGUAGE SETTING USER SETTINGS Press for access to various configurations. Select LANGUAGE SETTING and press confirm to • MENU LANGUAGE You may select the menu display language. • MAIN AND ALTERNATIVE AUDIO LANGUAGES If more than one audio language is transmitted, you may select the main and the alternative languages. • SUBTITLES If more than one subtitle is transmitted, you may select the main and the alternative subtitles.
ITD61_UK.qxd 10/11/04 9:25 Page 19 6. USER SETTINGS • VOLUME BAR TIME OUT Select how long the volume bar will be displayed (0 to 5 seconds). 0 second to have no volume bar displayed. Press to confirm. USER PREFERENCES BANNER TIME OUT BANNER TRANSPARENCY VOLUME BAR TIME OUT USER COUNTRY 4 25% 4 UK 6-3 TIME SETTING The time is set from the GMT time by using cursor or Press and selecting the country where you live.
ITD61_UK.qxd 10/11/04 9:25 Page 20 6. USER SETTINGS 6-4 FAVOURITE LISTS INSTALLATION (Not available on ITD 60/ITD 58) This function will enable you to make up a FAVOURITE list of the TV or radio type from the reference list A (built from provider (transponder) installation or a scanning) and erase it entirely to reconstruct a new one. CREATION Two lists are displayed simultaneously. • The list on the right side is the reference list (issued from transponder or scanning installation).
ITD61_UK.qxd 10/11/04 9:25 Page 21 6. USER SETTINGS 6-5 LOCKING (Not available on ITD 60/ITD 58) LOCKING CHANNELS TO LOCK LOCK BOX NO LOCK CHANNELS CHANNELS TO LOCK YES PARENTAL LOCK AGE 10 1 2 3 4 5 6 7 8 9 10 TEST 1 TEST 2 Demineur Frogs Tennis Bloomberg... d’Travelo i... CNN Int. TV 5 ARTE 11 12 13 14 15 16 17 DW-TV COMEDIE ! TWC 1 - ZIK... TW 2 - ... TW 3 - LCP TW 4 - ... TWC 5 - ... 4 types of locking are provided: • Select Lock Box (yes/no) for general locking.
ITD61_UK.qxd 10/11/04 9:25 Page 22 6. USER SETTINGS 6-6 CHANGING PROTECTION CODE CHANGE INSTALLATION CODE Enter your new code. The first segment blinks until its value is entered, then the second segment blinks, etc. As soon as the value has been entered, the segment is replaced with a star. Use cursor NEW CODE CONFIRMATION ---- on the remote control unit to come back to a value that has been entered and modify it until the whole is confirmed by .
ITD61_UK.qxd 10/11/04 9:25 Page 23 7. USING YOUR SET TOP BOX 7-1 CHANNEL CHANGE The Set Top Box provides several ways of channel switching: • Using and on the remote control unit: The Set Top Box switches to the next service up ( ( ) or the next service down ) from the current channel. Type in a single digit (1), which is displayed on the screen banner, e.g.“1--”.
ITD61_UK.qxd 10/11/04 9:25 Page 24 7. USING YOUR SET TOP BOX 7-2 PROGRAM INFORMATION Every time you change channels, you will receive program information for a few seconds (in the User preferences menu, you can select how long this information will be shown).
ITD61_UK.qxd 10/11/04 9:25 Page 25 7. USING YOUR SET TOP BOX If the icon is displayed (see D), an extended summary is available. Press INFO to display it. Use cursors and to switch between the current and the next program information. When there is a lot of text information , use cursors and to continue reading on the next info page.You can see another channel information by pressing cursors and .
ITD61_UK.qxd 10/11/04 9:25 Page 26 7. USING YOUR SET TOP BOX 7-5-2 Subtitle language When available, you can select among different subtitle languages. • Each time you press one of these two keys, you change language. • A time out automatically closes this menu. • The number on the left of each language indicates how many languages are available on this current channel. 7-6 VOLUME ADJUSTMENT To increase or reduce the volume, use cursor To turn off the sound quickly, press the or . mute key.
ITD61_UK.qxd 10/11/04 9:25 Page 27 7. USING YOUR SET TOP BOX 7-9-1 Sleep timer Enter the selected sleep hour. Confirm with . SLEEP TIMER SLEEP TIME > 01:15 CONFIRM PROGRAMMING CANCEL PROGRAMMING 7-9-2 Events timer This function is for future inovative use. You can make the Set Top Box start and stop at a predefined time.
ITD61_UK.qxd 10/11/04 9:25 Page 28 7. USING YOUR SET TOP BOX 7-10 ENHANCED PROGRAM GUIDE (Not available on ITD 60/ITD 58) To display more detailed information about a selected program, press the key. To remove this information, press EXIT key. A Resized video is displayed. This video is the current one before entering the EPG. B Channels list of the current list is displayed. Select the chosen channel with and and see the associated resized video by pressing .
ITD61_UK.qxd 10/11/04 9:25 Page 29 7. USING YOUR SET TOP BOX 7-12 RADIO MODE Press the Top Box. key on the remote control unit of the Set You can move through the list displayed using and . You can adjust the volume. 7-13 SET TOP BOX ENHANCEMENT The Set Top Box goes in this state when a new version of software is available on the network after startup. • Red led flashes. • The Welcome screen is displayed. Then a screen for “ download process ” request is displayed.
ITD61_UK.qxd 10/11/04 9:25 Page 30 7. USING YOUR SET TOP BOX Error Code Origin of Error User Action 1, 2 or 3 flashes Reception error Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request. 4, 5 or 6 flashes Flow validity errors Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request. 7 or 8 flashes Local errors Acknowledge the message by pressing any key on the remote control.
ITD61_UK.qxd 10/11/04 9:25 Page 31 7. USING YOUR SET TOP BOX 7-15 OUTLINE SPECIFICATIONS Tranmission standards Demultiplexing/Descrambling Front Panel DVB-T, MPEG 2, COFDM CD ISO/IEC 13818-1 compliant 1 leds IR sensor : 38 KHz Video Decoder Rear Panel MPEG-2 ( ISO/IEC 13818-2) Profile level : MP@ ML Input rates : 1.
ITD61_UK.qxd 10/11/04 9:25 Page 32 7. USING YOUR SET TOP BOX 7-16 GUARANTEE (TERMS AND CONDITIONS) ATTENTION In order to apply the guarantee, you should contact your dealer or SAGEM helpdesk at 0870 2488227. Proof of purchase will be required. Should any malfunctioning arise, the dealer or SAGEM helpdesk will advise you what to do.