User guide

33
Updating the firmware
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Administration.fm / 11.8.09
Schablone 2007_10_19
Restart
If the Gigaset SE680 WiMAX is not operating properly, you can reboot it. It should then
be ready for use again.
ì Open the Advanced Settings tab and on the Administration menu select Restart.
ì Click Ok to reboot the device.
A window will appear prompting you to confirm the procedure.
Updating the firmware
If your WiMAX provider provides a new downloadable firmware version for your Gigaset
SE680 WiMAX with new functions or to fix errors, you can update your device quickly
and easily.
ì First download the relevant firmware file from the Internet and save it on your PC.
Read the information provided carefully.
ì Open the Advanced Settings tab and on the Administration menu select
Firmware Update.
ì Enter the path and file name of the firmware file to be installed or click Browse to
select a file on your PC.
ì Click Ok to start the firmware update.
!
Only update the firmware if there is a new version of the firmware that is
currently installed on your device on the Internet. The firmware version
currently installed is shown under Active image version.
W
Do not disconnect your Gigaset SE680 WiMAX from the PC or the power
supply during the firmware update, as this could damage the device. It
may take up to five minutes before the device is ready for use again.