User guide

18
User interface
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09
Schablone 2007_10_19
Opening online Help
There is an online Help for each screen of the configuration progam, which you can
open directly on the screen.
ì Click on the question mark button at the top right.
The online Help is shown in the right pane of the configuration progam.
ì If necessary, click on Open Help window to open the online Help in a separate
window.
Menu structure
The menu of the user interface on your Gigaset SE680 WiMAX modem is split into the
following main areas: Home, Basic Setup Wizard, Advanced Settings and Status.
Under these menu options, you will find the following areas:
Home
Brief description of all the menus in your Gigaset SE680 WiMAX
modem, as well as the connection status and the language change
feature; see "User interface" on page 15.
Basic Setup Wizard
Establish a connection to the WiMAX network, optimise the
antenna direction and set up your Internet connection, see "Basic
Setup Wizard" on page 20.
Advanced Settings
Configure your Internet access and your local network and perform
administration tasks. For example, you can enter a system pass-
word for access to your Gigaset SE680 WiMAX or change it, see
"Configuration with the Web browser" on page 15.
Status
Obtain information about the operating status of your Gigaset
SE680 WiMAX modem and read off the device and version num-
bers as well as IP addresses; see "Status" on page 34.
Internet See "Internet" on page 35.
Local Network See "Local network LAN" on page 36.
Device Status See "Device status" on page 36.
Radio Status See "Radio status" on page 37.
Setting the language
The user interface is initially displayed in English. However, you can select another lan-
guage, e.g. German, French, Spanish.
ì If you wish to set your language, click on the Language button at the top right. This
opens the page for setting the language.
ì Click on the arrow next to the selection field to open it and select your language.
ì Click on Ok to change the language.