User guide

15
Configuration with the Web browser
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09
Schablone 2007_10_19
Configuration with the Web browser
You do not need to install any software on your PC to configure your Gigaset SE680
WiMAX modem; the configuration progam is stored on the device. Open this software
in the same way as an Internet page in the Web browser and make the required settings.
Your settings are then stored directly on the device.
On startup, the Basic Setup Wizard helps you set up a connection to the WiMAX network
and configure your Internet access.
Presentation of the configuration progam
To configure your Gigaset SE680 WiMAX modem, we recommend the Microsoft Internet
Explorer Version 7.0 or higher or Mozilla Firefox Version 2.0 or higher Web browser.
However, you can also use most other or older Web browsers.
User interface
ì Open your Web browser.
ì Enter the IP address of your Gigaset SE680 WiMAX modem in the address field of
your Web browser:
http://192.168.2.1
ì Press Enter (Return).
If a system password has been set up on your Gigaset SE680 WiMAX, the login screen
will now open.
Enter the system password supplied by your provider in the text box and click Ok.The
start page (Home) of the user interface opens, in which you can change the language
if necessary (see page 18).
Change the system password later to one of your own (see "System password" on
page 31).
If no system password has been set up on your Gigaset SE680 WiMAX, a security warn-
ing will appear first. You should then assign a system password as soon as possible.
ì Confirm the security warning with Ok.
The user interface start page opens.
i
For experienced users:
– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0
i
Number and amount of functions and settings provided by the configura-
tion program may differ specific to a project.
Launching the user interface