User guide

Wall mounting (optional)

Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Installation.fm / 11.8.09

Schablone 2006_02_08

Switching on the devices

ì Connect the power lead to the indoor unit.

ì Connect the power lead of the indoor unit to the mains power supply. The outdoor

modem is powered via the Ethernet cable and does not require its own mains con-

nection.

The system starts booting and performs a self-test.

After the self-test, the Gigaset SE680 WiMAX modem continually attempts to regis-

ter with a base station. Registration with the base station may be successful imme-

diately; otherwise, registration will take place when your Gigaset SE680 WiMAX

modem is being configured.

ì Check the LEDs during startup:

LEDs during startup:

–The ON power supply LED lights up green, and the Gigaset SE680 WiMAX

modem starts a self-test.

–The FAULT LED (red) and the CONNECT LED (green) light up for approximately 1

second and then go out. If the connection to the outdoor modem is then found

to be free from errors, the CONNECT LED is continuously lit up green. If an error

occurs, the FAULT and CONNECT LEDs start to flash alternately at regular inter-

vals.

Only use the Gigaset SE680 WiMAX modem with the supplied mains

cable.

Refernece number: C39280-Z4-C584

Manufacturer: PhiHong

Type: POE30U-560(G)-S

Input: 100-240V, 0.95A AC

Output: 56V, 0,55A DC