User guide

ManualsBrandsSAGEMCOM ManualsComputer equipmentGigaset SE680 WiMAX

Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Cover_front.fm / 11.8.09

Schablone 2007_10_19

Gigaset SE680 WiMAX

User Guide

This device works in a frequency band for which a general licence might have to be

obtained. Please contact your service provider or your National Authority for Frequency

Management about licensing before putting this device into service

Summary of content (62 pages)

PAGE 1
Schablone 2007_10_19 Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Cover_front.fm / 11.8.09 Gigaset SE680 WiMAX User Guide This device works in a frequency band for which a general licence might have to be obtained.
PAGE 2
PAGE 3
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / SE680_IVZ.fm / 11.8.09 Contents Schablone 2007_10_19 Contents For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information on Specific Absorption Rate (SAR) . . . . . . . . .
PAGE 4
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / SE680_IVZ.fm / 11.8.09 Contents Schablone 2007_10_19 Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Setting the operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuring Internet access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up the Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Safety.fm / 11.8.09 For your safety Schablone 2006_02_08 For your safety ì Please read the safety instructions carefully before putting into service. Safety precautions General safety instructions u Only pass on the Gigaset SE680 WiMAX modem to third parties with this user guide and the assembly instructions.
PAGE 6
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Safety.fm / 11.8.09 Notes on the user guide Schablone 2006_02_08 Information on Specific Absorption Rate (SAR) This device meets the limits for protecting the health of the public from the effecs of exposure to electromagnetic fields when it is operated in connection with the designated antenna(s) like described in the user manual. Your device is a radio transmitter and receiver.
PAGE 7
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Product_intro.fm / 11.8.09 The Gigaset SE680 WiMAX Schablone 2006_02_08 The Gigaset SE680 WiMAX What is WiMAX? WiMAX stands for "Worldwide Interoperability for Microwave Access", a modern wireless network technology that enables fast Internet connection even in remote areas. With WiMAX technology you are no longer dependent on a DSL infrastructure in your home or place of work.
PAGE 8
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Product_intro.fm / 11.8.09 Scope of delivery Schablone 2006_02_08 Product features u Wireless high-speed Internet access with a transmission rate of up to 20Mbps (14 Mbps downlink, 6 Mbps uplink) u Standards compliant: IEEE 802.
PAGE 9
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Product_intro.fm / 11.8.09 Scope of delivery Schablone 2006_02_08 Connectors and LEDs 1 2 3 4 5 6 7 1 2 Connector for the two-pin power lead, see "Switching on the devices" on page 14. CONNECT The LED shows whether or not the indoor unit is properly connected with the outdoor modem. u Green: The indoor unit is properly connected with the outdoor 3 FAULT modem.
PAGE 10
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Installation.fm / 11.8.09 Installing the Gigaset SE680 WiMAX modem Schablone 2006_02_08 Installing the Gigaset SE680 WiMAX modem The Gigaset SE680 WiMAX modem essentially comprises three components: u Outdoor modem with integrated antennas (X-pol) u External antenna (optional) u Indoor unit W The Gigaset SE680 WiMAX modem must be assembled and put into service by a qualified electrician.
PAGE 11
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Installation.fm / 11.8.09 System requirements Schablone 2006_02_08 Choosing the location u Choose the location so that you can easily establish the following connections: – Ethernet cable socket, which, for example, establishes the connection to the outdoor modem through a wall duct. – Ethernet cable socket for connection with a PC or network. – Connection of the power lead with a mains socket.
PAGE 12
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Installation.fm / 11.8.09 Wall mounting (optional) Schablone 2006_02_08 Connecting the Gigaset SE680 WiMAX modem Set up the connections on the indoor unit in the following order: 1. Connect the outdoor modem. 2. Connect the PC or the switch/hub. 3. Connect the indoor unit to the mains power supply and switch all the devices on.
PAGE 13
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Installation.fm / 11.8.09 Wall mounting (optional) Schablone 2006_02_08 Connecting the indoor unit to a PC ì Connect an Ethernet cable plug to the IN socket on the indoor unit. ì Connect the other plug of the Ethernet cable to the LAN interface on the PC. Connecting the indoor unit to a switch ì Connect an Ethernet cable plug to the IN socket on the indoor unit. ì Connect the other Ethernet cable plug to the switch or hub.
PAGE 14
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Installation.fm / 11.8.09 Wall mounting (optional) Schablone 2006_02_08 Switching on the devices Only use the Gigaset SE680 WiMAX modem with the supplied mains cable. ! Refernece number: C39280-Z4-C584 Manufacturer: PhiHong Type: POE30U-560(G)-S Input: 100-240V, 0.95A AC Output: 56V, 0,55A DC ì Connect the power lead to the indoor unit. ì Connect the power lead of the indoor unit to the mains power supply.
PAGE 15
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 Configuration with the Web browser Schablone 2007_10_19 Configuration with the Web browser You do not need to install any software on your PC to configure your Gigaset SE680 WiMAX modem; the configuration progam is stored on the device. Open this software in the same way as an Internet page in the Web browser and make the required settings. Your settings are then stored directly on the device.
PAGE 16
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 User interface Schablone 2007_10_19 If the login screen does not open: ì Check the connections; see "Connecting the Gigaset SE680 WiMAX modem" on page 12. ì If you use a firewall on the PC, it must allow connection to the Gigaset SE680 WiMAX. If applicable, switch off the firewall for a test; if you can then open the login screen, configure the firewall accordingly.
PAGE 17
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 Schablone 2007_10_19 User interface 3 Logout button: The button is only displayed if a system password is set up. Log off from your Gigaset SE680 WiMAX modem. 4 Open Help window button: Open the online Help relating to the menu item currently in the working area. 5 Menu area: Click the menu items to display the respective pages of the currently open configuration area or a submenu.
PAGE 18
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 User interface Schablone 2007_10_19 Setting the language The user interface is initially displayed in English. However, you can select another language, e.g. German, French, Spanish. ì If you wish to set your language, click on the Language button at the top right. This opens the page for setting the language. ì Click on the arrow next to the selection field to open it and select your language.
PAGE 19
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 The Home page Schablone 2007_10_19 The Home page Once you have logged in successfully to the Gigaset SE680 WiMAX modem, you will see the Home page for the device software. The start screen offers an overview of all areas of the configuration progam: Menu Description Basic Setup Wizard Perform the basic configuration and set up the radio connection to the WiMAX network (see page 20).
PAGE 20
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 Basic Setup Wizard Schablone 2007_10_19 Basic Setup Wizard The Basic Setup Wizard helps you start up your device and guides you step by step through the configuration process with the most important settings.
PAGE 21
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 Basic Setup Wizard Schablone 2007_10_19 Establishing a radio connection with a WiMAX network The Basic Setup Wizard will now scan the frequencies to establish an initial radio connection to a WiMAX network. The frequency scan begins automatically. A progress bar indicates how far the scan has progressed. In addition, you will see in the Remaining time area roughly how much time is still needed for the complete scan.
PAGE 22
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Basic_configuration.fm / 11.8.09 Basic Setup Wizard Schablone 2007_10_19 ì When a connection to a WiMAX network has been established, click on Next to make fine adjustments to the antenna. The quality of the radio connection is represented graphically by a signal strength bar. The longer the bar is, the better the radio connection. Try to obtain the best possible radio connection setting.
PAGE 23
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Advanced Settings Schablone 2005_07_27 Advanced Settings In the Advanced Settings menu, you can configure all the options for the Gigaset SE680 WiMAX. If required, you can also change the settings you made using the Basic Setup Wizard. The following table contains the options available in this menu.
PAGE 24
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Advanced Settings Schablone 2005_07_27 Setting the operating mode Via the operating mode, you define the role your Gigaset SE680 WiMAX will play when establishing and administering Internet connections. You can run your Gigaset SE680 WiMAX in the following operating modes: Router Your Gigaset SE680 WiMAX serves as an Internet router for the network components connected to the LAN port, i.e.
PAGE 25
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Advanced Settings Schablone 2005_07_27 Configuring Internet access If you have configured the Gigaset SE680 WiMAX using the Basic Setup Wizard, you have also configured your Internet access. You can check or change these settings in the Internet menu.
PAGE 26
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Schablone 2005_07_27 Advanced Settings PPPoE pass-through If you activate the PPPoE pass-through function, a PC in the network can connect to the Internet via its own connection ID. The router puts this connection through.
PAGE 27
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Advanced Settings Schablone 2005_07_27 Port Forwarding The Gigaset SE680 WiMAX comes with the NAT (Network Address Translation) function, which is always activated in Router operating mode. With address mapping, multiple users in the local network can access the Internet via the public IP address. All the local IP addresses are assigned to the router's public IP address by default.
PAGE 28
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Advanced Settings Schablone 2005_07_27 Opening the firewall for a selected PC (Exposed Host) You can set up a client in your local network to be a so-called "exposed host". Your device will then forward all incoming requests from the Internet to this client, with the exception of requests to the port numbers already defined via port forwarding.
PAGE 29
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Advanced Settings Schablone 2005_07_27 LAN configuration With the help of the LAN configuration you can change the preset values for the computer name and the private IP address for your Gigaset SE680 WiMAX and configure the integrated DHCP server. ì Open the Advanced Settings tab and select Local Network. The preset IP address is 192.168.2.1. This is the private IP address of the Gigaset SE680 WiMAX.
PAGE 30
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Advanced_configuration.fm / 11.8.09 Schablone 2005_07_27 WiMAX configuration Assigning static IP addresses to individual PCs Even if you have activated the DHCP server, you can still assign a static IP address to individual PCs (e.g. when setting up these PCs for NAT functions). ì Enter the MAC address of the PC to which you want to assign a static IP address and the IP address you wish to assign to the PC.
PAGE 31
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Administration.fm / 11.8.09 Administration Schablone 2007_10_19 Administration The user interface Administration menu includes several helpful functions for administering your Gigaset SE680 WiMAX.
PAGE 32
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Administration.fm / 11.8.09 Restoring factory settings Schablone 2007_10_19 Changing the password ì Enter the current password in the Current password field. If no default system password has been set, leave this field empty. ì Enter a new password in the New password field. – Select any series of characters with a minimum length of 4 and a maximum length of 20 characters.
PAGE 33
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Administration.fm / 11.8.09 Updating the firmware Schablone 2007_10_19 Restart If the Gigaset SE680 WiMAX is not operating properly, you can reboot it. It should then be ready for use again. ì Open the Advanced Settings tab and on the Administration menu select Restart. ì Click Ok to reboot the device. A window will appear prompting you to confirm the procedure.
PAGE 34
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Status.fm / 11.8.09 Status Schablone 2007_10_19 Status You can check the status of your Gigaset SE680 WiMAX with the pages in the Status menu. The menu is divided into several individual pages opened by clicking the entries in the menu area. To help with orientation, in the following sections the path is placed first so that you can quickly find the status messages described.
PAGE 35
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Status.fm / 11.8.09 Internet Schablone 2007_10_19 Firmware version Version number of the currently installed device software. You will also need to give your provider this number. ì If necessary, click the Refresh button to refresh the data in the status display. Internet Status > Internet The connection settings for your Gigaset SE680 WiMAX are displayed in the Internet submenu.
PAGE 36
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Status.fm / 11.8.09 Local network LAN Schablone 2007_10_19 Local network LAN Status > Local Network The configuration of the local network is displayed in the Local Network submenu. IP address IP address used by the Gigaset SE680 WiMAX in your local network: 192.168.2.1 Subnet mask Subnet mask of your local network: 255.255.255.
PAGE 37
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Status.fm / 11.8.09 Radio status Schablone 2007_10_19 Radio status Status > Radio Status Information about received and sent data as well as possible data transmission errors is displayed in the Radio Status submenu. Connected to a base station Indicates whether or not your Gigaset SE680 WiMAX is connected to a base station. Base station ID ID number of the base station to which the device is connected.
PAGE 38
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Operation.fm / 11.8.09 Using the Gigaset SE680 WiMAX Schablone 2007_10_19 Using the Gigaset SE680 WiMAX When you have finished configuring your Gigaset SE680 WiMAX modem, use it to surf the Internet, send e-mails etc.
PAGE 39
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Appendix Schablone 2007_10_19 Appendix Troubleshooting In the case of network problems troubleshooting may be difficult, as miscellaneous network parameters may be affected. This section only describes problems which are associated with the Gigaset SE680 WiMAX modem and the antenna. Symptom Possible cause and solutions No LED does light up. The Gigaset SE680 WiMAX modem its not connected to the mains.
PAGE 40
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Symptom The Gigaset SE680 WiMAX modem can not be reached via LAN (Ethernet). Possible cause and solutions ì If you operate the Gigaset SE680 WiMAX modem in bridge mode, first check the following: 1. In bridge mode the PC must be connected directly to the Gigaset SE680 WiMAX modem. 2. To configure the Gigaset SE680 WiMAX modem the PC must have a static IP address assigned.
PAGE 41
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Other faults and problems You are using a firewall on the PC that prevents access to the Gigaset SE680 WiMAX modem Test this, if necessary, by briefly switching off the firewall. If access is possible, configure the firewall. For details, refer to the user guide for your firewall.
PAGE 42
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Checking the connection to the Gigaset SE680 WiMAX You can check whether the PC is correctly connected to the Gigaset SE680 WiMAX modem. This can be done as follows: ì Open the command prompt on the PC: – Click on Start > Run. – Enter cmd in the input field and click on OK. The Command prompt window opens. ì Check whether the Gigaset SE680 WiMAX modem responds with the ping command.
PAGE 43
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Configuring the Web browser If you are using a current Web browser but cannot open the configuration progam in it, check the Web browser settings. i We recommend Microsoft Internet Explorer Version 7.0 or Mozilla Firefox 2.0 as the Web browser. u Do not use an HTTP proxy for accessing your Gigaset SE680 WiMAX modem. u Java and Javascript must be enabled.
PAGE 44
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Firefox 2.0: ì ì ì ì ì Open Firefox. Click on Tools and then on Settings. Click on Advanced. Open the Network tab and click on Settings in the Connection area. Select either Direct connection to the Internet or Manual proxy configuration.
PAGE 45
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Allowing pop-up windows Pop-up windows are small windows that are opened either as the result of an action or automatically. The device software for your Gigaset SE680 WiMAX modem uses pop-up windows to display the online Help, for example.
PAGE 46
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Troubleshooting Schablone 2007_10_19 Specifications Model Gigaset SE680 WiMAX Dimensions Outdoor Modem: approx. 228.5 x 208 x 101 mm Indoor unit: approx. 140 x 65 x 36 mm Operating temperature Outdoor Modem: –40 °C to +60 °C Indoor unit: 0 °C to +40 °C Network interface 1 Ethernet 10/100BaseT (RJ45, LAN) Frequency 2.3–2.4 / 2.5–2.7 / 3.4–3.
PAGE 47
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 WEEE Schablone 2007_10_19 Putting into service This device is intended for use in the country indicated on the device's label. The device is operated under a single licence, which is held by your service provider. Contact your service provider regarding licensing before you put the device into service. Please observe the legal provisions and local restrictions when putting the device into service.
PAGE 48
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 WEEE Schablone 2007_10_19 The Gigaset SE680 WiMAX – Free software The modem contains, among other things, free software that was developed by third parties and is protected by copyright. The software is provided free of charge. You are authorised to use this free software in accordance with the relevant licence conditions.
PAGE 49
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Appendix.fm / 12.8.09 Schablone 2007_10_19 WEEE OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. gSOAP "Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2004 Robert A. van Engelen, Genivia inc. All Rights Reserved.
PAGE 50
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Glossary Schablone 2007_10_19 Glossary Address Translation (NAT) Network Address Translation. NAT is a method for converting IP addresses (mainly private IP addresses) in a network to one or more public IP addresses on the Internet. With NAT, several network components in a LAN can share a public IP address to connect to the Internet.
PAGE 51
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary DNS Domain Name System. DNS permits the assignment of IP addresses to PC or domain names that are easier to remember. A DNS server must administer this information for each local network with an Internet connection. As soon as a page on the Internet is called up, the Web browser obtains the corresponding IP address from the DNS server so that it can establish the connection.
PAGE 52
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary FTP File Transfer Protocol. Protocol for exchanging files via the Internet. FTP is used, for example, to make files available for download or to receive files from other users. Full duplex Data transmission operating mode in which data can be sent and received at the same time. FXS Foreign Exchange Station. Phone port to which an analogue terminal (phone, fax or answer machine) can be connected.
PAGE 53
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary IEEE 802.16 Standard defined by the IEEE for WiMAX. Similarly to other standards in the 802 series (e.g. 802.3 Ethernet, 802.11 WLAN), the WiMAX standard is one of the standards for networks. The standard has progressed in accordance with new developments; there are currently two main versions: u IEEE 802.16-2004: WiMAX, which specifies the secure location for connection part- ners. u IEEE 802.
PAGE 54
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary ISP Internet Service Provider. See Provider. LAN Local Area Network, local network. A local network links network components so that they can exchange data and share resources. The physical range is restricted to a particular area (a site). A local network can be connected to other local networks or a widearea network (WAN) such as the Internet. LED Light Emitting Diode.
PAGE 55
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary Network protocol The network protocol is the standard via which different PCs exchange data in a network. A connection can only be established between PCs in a network if they all use the same protocol. The TCP/IP network protocol is the most extensive network protocol, which is also used for connections to the Internet.
PAGE 56
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary SMTP Simple Mail Transfer Protocol. The SMTP protocol is a TCP/IP protocol and regulates the exchange of electronic post on the Internet. Your Provider provides you with access to an SMTP server. Subnet A subnet divides a network into smaller units.
PAGE 57
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Glossary.fm / 11.8.09 Schablone 2007_10_19 Glossary Uplink Data that your Gigaset SE680 WiMAX modem forwards from your PC or local network to external sites (e.g. to the Internet). URL Universal Resource Locator. Globally unique address of a domain on the Internet, e.g. http://www.sagem-communications.com. Virtual server A virtual Server provides a service on the Internet that runs not on itself, but on another network component.
PAGE 58
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / SE680_SIX.fm / 11.8.09 Index Schablone 2007_10_19 Index A Address Translation . . . . . . . . . . . . . . Administration. . . . . . . . . . . . . . . . . . system password . . . . . . . . . . . . . . Advanced Settings features . . . . . . . . . . . . . . . . . . . . . Antenna adjusting . . . . . . . . . . . . . . . . . . . . aligning precisely . . . . . . . . . . . . . . connecting . . . . . . . . . . . . . . . . . . . Appendix . . . . . . . . . .
PAGE 59
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / SE680_SIX.fm / 11.8.09 Index Schablone 2007_10_19 I IEEE . . . . . . . . . . . . . . . . . . . . . . . . . . 52 IEEE 802.16 . . . . . . . . . . . . . . . . . . . . 53 Installation . . . . . . . . . . . . . . . . . . . . 10 connecting . . . . . . . . . . . . . . . . . . . 12 location . . . . . . . . . . . . . . . . . . . . . 11 outdoor modem . . . . . . . . . . . . . . . 12 PC . . . . . . . . . . . . . . . . . . . . . . . . . 12 Switch . . . . . . .
PAGE 60
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / SE680_SIX.fm / 11.8.09 Index Schablone 2007_10_19 P Password forgotten . . . . . . . . . . . . . . . . . . . . 41 ping command . . . . . . . . . . . . . . . . . 42 Pop-up blocker Firefox . . . . . . . . . . . . . . . . . . . . . . 45 Internet Explorer . . . . . . . . . . . . . . 45 Pop-up window . . . . . . . . . . . . . . . . . 45 Firefox . . . . . . . . . . . . . . . . . . . . . . 45 Internet Explorer . . . . . . . . . . . . . . 45 Port . . . . .
PAGE 61
Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / SE680_SIX.fm / 11.8.09 Index Schablone 2007_10_19 W WAN . . . . . . . . . . . . . . . . . . . . . . . . . Web browser configuring . . . . . . . . . . . . . . . . . . HTTP proxy . . . . . . . . . . . . . . . . . . . Java . . . . . . . . . . . . . . . . . . . . . . . . JavaScript . . . . . . . . . . . . . . . . . . . . launching user interface . . . . . . . . . menu structure . . . . . . . . . . . . . . . pop-up window . . . . . . . . . . . . . . .
PAGE 62
Schablone 2007_10_19 Gigaset SE680 WiMAX / engbt / A31008-N925-R101-4x-7619 / Cover_back.fm / 6.8.09 Issued by Sagem Communications SAS Sagem Communications 250, route de l'Empereur - 92500 RUEIL MALMAISON Sagem Communications SAS is a trademark licensee of Gigaset Communications GmbH © Sagem Communications SAS 2009 All rights reserved. Subject to availability. Rights of modification reserved. www.sagem-communications.com A31008-N925-R101-4x-7619 08.