Sagemcom F@ST 3896 SUM Next Generation High Speed DOCSIS3.
PACKAGE CONTENTS The package contains the following items: • F@ST 3896 SUM residential gateway • Power adapter • Safety and regulatory information sheet • This guide INSTALLING THE PRODUCT Coaxial cable connection Connecting your F@ST 3896 SUM to your service provider’s network 1. Connect one end of the coaxial cable (not included) to a cable outlet 2. Connect the other end of the coaxial cable to the cable port of the F@ST 3896 SUM Power connection Powering on the F@ST 3896 SUM 1.
Resetting the F@ST 3896 SUM Ethernet cable Cat-5e or better Your residential gateway is equipped with a reset button reachable with a paper clip or the tip of a pen. To restart the device, press the reset button for less than 2 seconds. To restore the device to factory configuration, press the reset button for 5 seconds or longer before releasing. Reset button The residential gateway will then restart and perform the initialization sequence.
All rights reserved. The information and specifications included are subject to change without prior notice. Sagemcom Broadband tries to ensure that all information in this document is correct, but does not accept liability for error or omission. Non contractual document. All trademarks are registered by their respective owners. 07/2022 Sagemcom Broadband SAS www.sagemcom.
