Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-43





• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.

Field Action Default value



Enable NAT
Check the box to activate the NAT function.
Note: NAT is a configurable IP address
translation function which will be applied
to the interfaces of your router which you
will have activated for this function.
Not checked
Enable Fullcone NAT
a
Check the box to activate the Fullcone NAT
function.
Not checked
Enable Firewall Check the box to activate the Firewall service. Not checked
Enable IGMP Multicast Check the box to activate the IGMP function. Not checked
a. This field only appears when the "Enable NAT" field is activated (box checked).

• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.