Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-37





• Click on the Next button to continue configuring the WAN service.





Field

Action
Default
value

PPP Username
Enter your connection ID.
This information is provided to you by your Internet Service
Provider (ISP).
-

PPP Password
Enter your connection password.
This information is provided to you by your Internet Service
Provider (ISP).
-




Authentication Method
Select the authentication method of your choice from the scroll
down list:
• AUTO
• PAP
• CHAP
• MSCHAP
AUTO
PPP retry on
authentication error
Check the box, PPP can be retried again and again while
authentication fails
Checked

PPP retry period
(seconds)
a
Enter if required a retry period. This value (in seconds) is by
default set to 15 seconds. You can set another value from 3 to
65535.
15


PPP MTU (Bytes)
Enter an MTU (Maximum Transfer Unit) value. This value (in
bytes) is between 46 and 1500.
Note: The MTU specifies the maximum size of the data used
(IP packets) expressed as a number of bytes.
1500